[PATCH v6 2/2] arm64: dts: mediatek: mt8195: add MDP3 nodes

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Fri Sep 22 01:29:35 PDT 2023


Il 22/09/23 08:50, Moudy Ho ha scritto:
> Add device nodes for Media Data Path 3 (MDP3) modules.
> 
> Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8195.dtsi | 388 +++++++++++++++++++++++
>   1 file changed, 388 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 4dbbf8fdab75..cf61ba7b8956 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1960,6 +1960,114 @@
>   			#clock-cells = <1>;
>   		};
>   

..snip..

> +
> +		display at 14006000 {
> +			compatible = "mediatek,mt8183-mdp3-rsz";

Please always add a SoC-specific compatible (both here and in bindings).

compatible = "medaitek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";

> +			reg = <0 0x14006000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
> +			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
> +					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
> +			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
> +		};
> +

..snip..

> +
> +		dma-controller at 1400c000 {
> +			compatible = "mediatek,mt8183-mdp3-wrot";

same here

> +			reg = <0 0x1400c000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
> +			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
> +					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
> +			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
> +			iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
> +			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
> +			#dma-cells = <1>;
> +		};
> +
>   		mutex at 1400f000 {
>   			compatible = "mediatek,mt8195-vpp-mutex";
>   			reg = <0 0x1400f000 0 0x1000>;
> @@ -2107,6 +2215,286 @@
>   			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
>   		};
>   

..snip..

> +
> +		display at 14f14000 {
> +			compatible = "mediatek,mt8183-mdp3-rsz";

and here

> +			reg = <0 0x14f14000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>;
> +			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
> +					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>;
> +			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
> +		};
> +
> +		display at 14f15000 {
> +			compatible = "mediatek,mt8183-mdp3-rsz";

...and here

> +			reg = <0 0x14f15000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
> +			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
> +					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
> +			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
> +		};
> +
> +		display at 14f16000 {
> +			compatible = "mediatek,mt8183-mdp3-rsz";

......and here.

> +			reg = <0 0x14f16000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
> +			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
> +					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
> +			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
> +		};
> +

..snip..

> +
> +		dma-controller at 14f23000 {
> +			compatible = "mediatek,mt8183-mdp3-wrot";

...again... and for the other two occurrences of wrot as well.

Apart from that, looks good.

Regards,
Angelo

> +			reg = <0 0x14f23000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>;
> +			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
> +					      <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>;
> +			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
> +			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>;
> +			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
> +			#dma-cells = <1>;
> +		};
> +
> +		dma-controller at 14f24000 {
> +			compatible = "mediatek,mt8183-mdp3-wrot";
> +			reg = <0 0x14f24000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
> +			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
> +					<CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
> +			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
> +			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>;
> +			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
> +			#dma-cells = <1>;
> +		};
> +
> +		dma-controller at 14f25000 {
> +			compatible = "mediatek,mt8183-mdp3-wrot";
> +			reg = <0 0x14f25000 0 0x1000>;
> +			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
> +			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
> +					<CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
> +			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
> +			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>;
> +			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
> +			#dma-cells = <1>;
> +		};
> +
>   		imgsys: clock-controller at 15000000 {
>   			compatible = "mediatek,mt8195-imgsys";
>   			reg = <0 0x15000000 0 0x1000>;




More information about the Linux-mediatek mailing list