Re: Re: [PATCH net-next v12 08/18] net: ethernet: mtk_eth_soc: fix 1000Base-X and 2500Base-X modes

Frank Wunderlich frank-w at public-files.de
Sat Mar 11 12:21:47 PST 2023


Am 11. März 2023 21:00:20 MEZ schrieb "Russell King (Oracle)" <linux at armlinux.org.uk>:
>On Sat, Mar 11, 2023 at 01:05:37PM +0100, Frank Wunderlich wrote:

>> i got the 2.5G copper sfps, and tried them...they work well with the v12 (including this patch), but not in v13... 

>> how can we add a quirk to support this?
>
>Why does it need a quirk?

To disable the inband-mode for this 2.5g copper
sfp. But have not found a way to set a flag which i
can grab in phylink.

The interface imho can only hold 1 value 
(speedmode which is correctly set to 2500baseX) 
and the mode holds ethtool options which seem 
not accessable from phylink.c

>> 
>> some more information:
>> 
>> root at bpi-r3:~# ethtool eth1
>> Settings for eth1:
>>         Supported ports: [ FIBRE ]
>>         Supported link modes:   2500baseX/Full
>>         Supported pause frame use: Symmetric Receive-only
>>         Supports auto-negotiation: Yes
>>         Supported FEC modes: Not reported
>>         Advertised link modes:  2500baseX/Full
>>         Advertised pause frame use: Symmetric Receive-only
>>         Advertised auto-negotiation: Yes
>>         Advertised FEC modes: Not reported
>>         Speed: 2500Mb/s
>>         Duplex: Full
>>         Auto-negotiation: on
>>         Port: FIBRE
>>         PHYAD: 0
>>         Transceiver: internal
>>         Current message level: 0x000000ff (255)
>>                                drv probe link timer ifdown ifup rx_err tx_err
>>         Link detected: yes
>> root at bpi-r3:~# ethtool -m eth1
>>         Identifier                                : 0x03 (SFP)
>>         Extended identifier                       : 0x04 (GBIC/SFP defined by 2-wire interface ID)
>>         Connector                                 : 0x07 (LC)
>>         Transceiver codes                         : 0x00 0x01 0x00 0x00 0x00 0x00 0x02 0x00 0x00
>>         Transceiver type                          : SONET: OC-48, short reach
>>         Encoding                                  : 0x05 (SONET Scrambled)
>>         BR, Nominal                               : 2500MBd

>>         Vendor name                               : OEM
>>         Vendor OUI                                : 00:00:00
>>         Vendor PN                                 : SFP-2.5G-T
>>         Vendor rev                                : 1.0
>>         Option values                             : 0x00 0x1a
...

>> 
>> i guess this sfp have a phy as it can operate in 100/1000/2500 mode like described on the module.
>
>It would help to know the kernel messages.

I had only the sfp message with vendor/partno and the interface up from mac (2500baseX/Full)
But no link up.

Which message(s) do you want to see?


regards Frank



More information about the Linux-mediatek mailing list