[PATCH v2 5/5] arm: dts: mt7623: enable flow control on port at 6

[arinc9.unal at gmail.com]

From: Arınç ÜNAL <arinc.unal at arinc9.com>

Flow control needs to be enabled on both sides to work.
It is already enabled on gmac0, enable it on port at 6 too.

Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
 arch/arm/boot/dts/mt7623a.dtsi         | 1 +
 arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index dd522e508eb3..2a50b5c0c933 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -88,6 +88,7 @@ port at 6 {
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 6b0c3d1006ab..34994f3f5a4b 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -230,6 +230,7 @@ port at 6 {
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};
-- 
2.37.2