[PATCH net-next v2 4/5] net: mediatek: sgmii: set the speed according to the phy interface in AN

Russell King (Oracle) linux at armlinux.org.uk
Mon Sep 19 04:15:43 PDT 2022


On Mon, Sep 19, 2022 at 10:37:11AM +0200, Alexander Couzens wrote:
> The non auto-negotioting code path is setting the correct speed for the
> interface. Ensure auto-negotiation code path is doing it as well.

While I see the logic in doing this in the autoneg path, if you look
at mtk_pcs_config(), you'll notice that this code you're adding is
unreachable.

If interface is PHY_INTERFACE_MODE_2500BASEX, then we will call
mtk_pcs_setup_mode_force(). We only call mtk_pcs_setup_mode_an() for
the PHY_INTERFACE_MODE_SGMII case when in-band mode is selected, so
this can become:

	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
	val &= ~RG_PHY_SPEED_MASK;
	regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!



More information about the Linux-mediatek mailing list