[PATCH RFC net-next v2 0/5] net: dsa: always use phylink
Hauke Mehrtens
hauke at hauke-m.de
Wed Jul 6 12:05:22 PDT 2022
On 7/6/22 18:27, Florian Fainelli wrote:
> On 7/6/22 03:14, Vladimir Oltean wrote:
>> Hi Florian,
>>
>> On Tue, Jul 05, 2022 at 09:42:33AM -0700, Florian Fainelli wrote:
>>> On 7/5/22 02:46, Russell King (Oracle) wrote:
>>>> A new revision of the series which incorporates changes that Marek
>>>> suggested. Specifically, the changes are:
>>>>
>>>> 1. Patch 2 - use the phylink_get_caps method in mv88e6xxx to get the
>>>> default interface rather than re-using port_max_speed_mode()
>>>>
>>>> 2. Patch 4 - if no default interface is provided, use the supported
>>>> interface mask to search for the first interface that gives the
>>>> fastest speed.
>>>>
>>>> 3. Patch 5 - now also removes the port_max_speed_mode() method
>>>
>>> This was tested with bcm_sf2.c and b53_srab.b and did not cause
>>> regressions,
>>> however we do have a 'fixed-link' property for the CPU port (always
>>> have had
>>> one), so there was no regression expected.
>>
>> What about arch/arm/boot/dts/bcm47189-tenda-ac9.dts?
>
> You found one of the devices that I do not have access to and did not
> test, thanks. We do expect to run the port at 2GBits/sec on these
> devices however there is no "official" way to advertise that a port can
> run at 2Gbits/sec, as this is not even a "sanctioned" speed. I do have a
> similar device however, so let me run some more tests, we won't see a
> regression however since we do not use the NATP accelerator which would
> be the reason to run the port at 2Gbits/sec.
I will try this change on some devices with the lantiq gswip driver at
the weekend.
On the SoC supported by the lantiq gswip driver the switch is integrated
in the SoC and there is a internal link with more than 1GBit/s
connecting the switch to the rest of the system. I think it is also
around 2GBit/s. We can not configure the interface speed or many other
interface settings for the link between the switch and the CPU. How
should the device tree ideally look for this setup?
Hauke
More information about the Linux-mediatek
mailing list