[PATCH 11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl

[Arınç ÜNAL]

On 13/04/2022 18:37, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
>> MT7688 SoCs.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
>> ---
>>   .../pinctrl/ralink,mt7620-pinctrl.yaml        | 87 +++++++++++++++++++
>>   1 file changed, 87 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..01578b8aa277
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Ralink MT7620 Pin Controller
>> +
>> +maintainers:
>> +  - Arınç ÜNAL <arinc.unal at arinc9.com>
>> +  - Sergio Paracuellos <sergio.paracuellos at gmail.com>
>> +
>> +description:
>> +  Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
>> +  The pin controller can only set the muxing of pin groups. Muxing indiviual pins
> 
> Run spellcheck on original bindings, don't copy same typos.

Will address, thanks!

> 
>> +  is not supported. There is no pinconf support.
>> +
>> +properties:
>> +  compatible:
>> +    const: ralink,mt7620-pinctrl
>> +
>> +patternProperties:
>> +  '-pins$':
>> +    type: object
>> +    patternProperties:
>> +      '^(.*-)?pinmux$':
> 
> Why do you have two levels here? pins->pinmux->actual pin configuration?

Yes, pins->pinmux->pin-configuration is currently how it's done.

> Cannot be something like brcm,bcm636x has?

Dunno, I'll take a look.

> 
>> +        type: object
>> +        description: node for pinctrl.
>> +        $ref: pinmux-node.yaml#
>> +
>> +        properties:
>> +          groups:
>> +            description: The pin group to select.
> 
> I wonder where do you configure particular pins because these are
> groups... It's a bit confusing to configure "i2c" group into "i2c" -
> looks obvious.

We don't configure each pin particularly. Ralink driver only supports 
muxing certain functions for certain pin groups as hinted on the binding 
description.

> 
>> +            enum: [
>> +              # For MT7620 SoC
>> +              ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
>> +
>> +              # For MT7628 and MT7688 SoCs
>> +              gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
>> +              p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
>> +              uart1, uart2, wdt, wled_an, wled_kn,
>> +            ]
>> +
>> +          function:
>> +            description: The mux function to select.
>> +            enum: [
>> +              # For MT7620 SoC
>> +              ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
>> +              pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
>> +              wdt refclk, wdt rst, wled,
>> +
>> +              # For MT7628 and MT7688 SoCs
>> +              antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
>> +              p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
>> +              pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
>> +              uart1, uart2, utif, wdt, wled_an, wled_kn, -,
> 
> All these lines do not fit in 80-character limit. Linux coding style
> still expects this in most of cases.

Ok, dt_binding_check warns after 110 characters so I made it fit that. 
I'll update to 80.

Arınç