[PATCH v8, 00/15] media: mtk-vcodec: support for M8192 decoder
allen-kh.cheng
allen-kh.cheng at mediatek.com
Wed Apr 13 00:03:24 PDT 2022
Hi Nicolas,
On Tue, 2022-04-12 at 10:48 -0400, Nicolas Dufresne wrote:
> Le lundi 11 avril 2022 à 11:41 +0800, yunfei.dong at mediatek.com a
> écrit :
> > Hi Nicolas,
> >
> > On Thu, 2022-03-31 at 16:48 -0400, Nicolas Dufresne wrote:
> > > Hi Yunfei,
> > >
> > > thanks for the update, I should be testing this really soon.
> > >
> > > Le jeudi 31 mars 2022 à 10:47 +0800, Yunfei Dong a écrit :
> > > > This series adds support for mt8192 h264/vp8/vp9 decoder
> > > > drivers.
> > > > Firstly, refactor
> > > > power/clock/interrupt interfaces for mt8192 is lat and core
> > > > architecture.
> > >
> > > Similarly to MT8173 and MT8183, a shared* firmware is needed for
> > > this
> > > CODEC to
> > > work (scp.img). I looked into linux-firmware[1] it has not been
> > > added
> > > for mt8192
> > > yet. As your patches are getting close to be ready, it would be
> > > important to
> > > look into this so the patchset does not get blocked due to that.
> > >
> > > best regards,
> > > Nicolas
> > >
> > > [1]
> > >
https://urldefense.com/v3/__https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/mediatek__;!!CTRNKA9wMg0ARbw!zy4N6JDroSXtumXXa7MuxAgYAPAink8uyW-978vpWct8S3vOjBqXirFE8uTEHopHCovbSl0FNP9LPgWCEBrZfMIcvQ$
> > >
> > > * Shared at least between MDP3 and MTK VCODEC from my knowledge
> > >
> >
> > Thanks for your remind.
> >
> > I have already sent mt8192 scp.img to github.
> >
> >
https://urldefense.com/v3/__https://github.com/yunfeidongmediatek/linux_fw_scp_8192/commit/3ac2fc85bc7dfcebdb92b5b5808b0268cdfb772d__;!!CTRNKA9wMg0ARbw!zy4N6JDroSXtumXXa7MuxAgYAPAink8uyW-978vpWct8S3vOjBqXirFE8uTEHopHCovbSl0FNP9LPgWCEBpf9F_nWA$
> >
> >
> > Waiting for to be merged.
>
> On boards I have, the firmware is loaded from /lib/firmware/scp.img,
> but with
> this submission it will be in lib/firmware/mediatek/mt8192/scp.img .
> I haven't
> found anything around:
>
> drivers/remoteproc/mtk_scp.c:812: char *fw_name = "scp.img";
>
> That would use the platform path. This seems like a problem to me,
> the
> upstreaming of the firmware isn't being aligned with the were the
> firmware is
> picked by the upstream driver. Correct me if I got this wrong, but
> I'd really
> like to clarify this.
>
> Nicolas
>
I am not sure why it's accepted the fw path of scp is
/lib/firmware/scp.img in mt8173/8183 but we upload scp.ing in
/lib/firmware/mediatek/mt8173(mt8183)/scp.img to
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/mediatek
Currently, the scp driver will load firmware in /lib/firmware/scp.img.
that means there is only one firmware for a specific platform.
I think we can send a PATCH to make firmware name of scp being more
flexible.
Maybe get firmware name from dts. e.g.,
&scp {
status = "okay";
firmware-name = "mediatek/mt81xx/scp.img";
};
Do you think it feasible?
If you have any concerns, please let us know.
Thanks,
Allen
> >
> > Best Regards,
> > Yunfei Dong
> >
> > > >
> > > > Secondly, add new functions to get frame buffer size and
> > > > resolution
> > > > according
> > > > to decoder capability from scp side. Then add callback function
> > > > to
> > > > get/put
> > > > capture buffer in order to enable lat and core decoder in
> > > > parallel,
> > > > need to
> > > > adjust GStreamer at the same time.
> > > >
> > > > Then add to support MT21C compressed mode and fix v4l2-
> > > > compliance
> > > > fail.
> > > >
> > > > Next, extract H264 request api driver to let mt8183 and mt8192
> > > > use
> > > > the same
> > > > code, and adds mt8192 frame based h264 driver for stateless
> > > > decoder.
> > > >
> > > > Lastly, add vp8 and vp9 stateless decoder drivers.
> > > >
> > > > Patches 1 refactor power/clock/interrupt interface.
> > > > Patches 2~4 get frame buffer size and resolution according to
> > > > decoder capability.
> > > > Patches 5 set capture queue bytesused.
> > > > Patches 6 adjust GStreamer.
> > > > Patch 7~11 add to support MT21C compressed mode and fix v4l2-
> > > > compliance fail.
> > > > patch 12 record capture queue format type.
> > > > Patch 13~14 extract h264 driver and add mt8192 frame based
> > > > driver
> > > > for h264 decoder.
> > > > Patch 15~16 add vp8 and vp9 stateless decoder drivers.
> > > > Patch 17 prevent kernel crash when rmmod mtk-vcodec-dec.ko
> > > > ---
> > > > changes compared with v6:
> > > > - adjust GStreamer, separate src buffer done with
> > > > v4l2_ctrl_request_complete for patch 6.
> > > > - remove v4l2_m2m_set_dst_buffered.
> > > > - add new patch to set each plane bytesused in buf prepare for
> > > > patch 5.
> > > > - using upstream interface to update vp9 prob tables for patch
> > > > 16.
> > > > - fix maintainer comments.
> > > > - test the driver with chrome VD and
> > > > GStreamer(H264/VP9/VP8/AV1).
> > > > changes compared with v6:
> > > > - rebase to the latest media stage and fix conficts
> > > > - fix memcpy to memcpy_fromio or memcpy_toio
> > > > - fix h264 crash when test field bitstream
> > > > changes compared with v5:
> > > > - fix vp9 comments for patch 15
> > > > - fix vp8 comments for patch 14.
> > > > - fix comments for patch 12.
> > > > - fix build errors.
> > > > changes compared with v4:
> > > > - fix checkpatch.pl fail.
> > > > - fix kernel-doc fail.
> > > > - rebase to the latest media codec driver.
> > > > changes compared with v3:
> > > > - remove enum mtk_chip for patch 2.
> > > > - add vp8 stateless decoder drivers for patch 14.
> > > > - add vp9 stateless decoder drivers for patch 15.
> > > > changes compared with v2:
> > > > - add new patch 11 to record capture queue format type.
> > > > - separate patch 4 according to tzung-bi's suggestion.
> > > > - re-write commit message for patch 5 according to tzung-bi's
> > > > suggestion.
> > > > changes compared with v1:
> > > > - rewrite commit message for patch 12.
> > > > - rewrite cover-letter message.
> > > > ---
> > > > Yunfei Dong (17):
> > > > media: mediatek: vcodec: Add vdec enable/disable hardware
> > > > helpers
> > > > media: mediatek: vcodec: Using firmware type to separate
> > > > different
> > > > firmware architecture
> > > > media: mediatek: vcodec: get capture queue buffer size from
> > > > scp
> > > > media: mediatek: vcodec: Read max resolution from
> > > > dec_capability
> > > > media: mediatek: vcodec: set each plane bytesused in buf
> > > > prepare
> > > > media: mediatek: vcodec: Refactor get and put capture buffer
> > > > flow
> > > > media: mediatek: vcodec: Refactor supported vdec formats and
> > > > framesizes
> > > > media: mediatek: vcodec: Getting supported decoder format
> > > > types
> > > > media: mediatek: vcodec: Add format to support MT21C
> > > > media: mediatek: vcodec: disable vp8 4K capability
> > > > media: mediatek: vcodec: Fix v4l2-compliance fail
> > > > media: mediatek: vcodec: record capture queue format type
> > > > media: mediatek: vcodec: Extract H264 common code
> > > > media: mediatek: vcodec: support stateless H.264 decoding for
> > > > mt8192
> > > > media: mediatek: vcodec: support stateless VP8 decoding
> > > > media: mediatek: vcodec: support stateless VP9 decoding
> > > > media: mediatek: vcodec: prevent kernel crash when rmmod
> > > > mtk-vcodec-dec.ko
> > > >
> > > > .../media/platform/mediatek/vcodec/Makefile | 4 +
> > > > .../platform/mediatek/vcodec/mtk_vcodec_dec.c | 62 +-
> > > > .../mediatek/vcodec/mtk_vcodec_dec_drv.c | 8 +-
> > > > .../mediatek/vcodec/mtk_vcodec_dec_pm.c | 166 +-
> > > > .../mediatek/vcodec/mtk_vcodec_dec_pm.h | 6 +-
> > > > .../mediatek/vcodec/mtk_vcodec_dec_stateful.c | 19 +-
> > > > .../vcodec/mtk_vcodec_dec_stateless.c | 257 +-
> > > > .../platform/mediatek/vcodec/mtk_vcodec_drv.h | 41 +-
> > > > .../mediatek/vcodec/mtk_vcodec_enc_drv.c | 5 -
> > > > .../platform/mediatek/vcodec/mtk_vcodec_fw.c | 6 +
> > > > .../platform/mediatek/vcodec/mtk_vcodec_fw.h | 1 +
> > > > .../vcodec/vdec/vdec_h264_req_common.c | 310 +++
> > > > .../vcodec/vdec/vdec_h264_req_common.h | 272 +++
> > > > .../mediatek/vcodec/vdec/vdec_h264_req_if.c | 438 +---
> > > > .../vcodec/vdec/vdec_h264_req_multi_if.c | 619 +++++
> > > > .../mediatek/vcodec/vdec/vdec_vp8_req_if.c | 437 ++++
> > > > .../vcodec/vdec/vdec_vp9_req_lat_if.c | 2072
> > > > +++++++++++++++++
> > > > .../platform/mediatek/vcodec/vdec_drv_if.c | 37 +-
> > > > .../platform/mediatek/vcodec/vdec_drv_if.h | 3 +
> > > > .../platform/mediatek/vcodec/vdec_ipi_msg.h | 36 +
> > > > .../platform/mediatek/vcodec/vdec_msg_queue.c | 2 +
> > > > .../platform/mediatek/vcodec/vdec_msg_queue.h | 2 +
> > > > .../platform/mediatek/vcodec/vdec_vpu_if.c | 53 +-
> > > > .../platform/mediatek/vcodec/vdec_vpu_if.h | 15 +
> > > > .../platform/mediatek/vcodec/venc_vpu_if.c | 2 +-
> > > > include/linux/remoteproc/mtk_scp.h | 2 +
> > > > 26 files changed, 4274 insertions(+), 601 deletions(-)
> > > > create mode 100644
> > > > drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_commo
> > > > n.c
> > > > create mode 100644
> > > > drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_commo
> > > > n.h
> > > > create mode 100644
> > > > drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_multi
> > > > _if.
> > > > c
> > > > create mode 100644
> > > > drivers/media/platform/mediatek/vcodec/vdec/vdec_vp8_req_if.c
> > > > create mode 100644
> > > > drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if
> > > > .c
> > > >
> > >
> > >
>
>
More information about the Linux-mediatek
mailing list