[PATCH v8, 00/15] media: mtk-vcodec: support for M8192 decoder

Tue Apr 12 07:48:00 PDT 2022

Le lundi 11 avril 2022 à 11:41 +0800, yunfei.dong at mediatek.com a écrit :
> Hi Nicolas,
> 
> On Thu, 2022-03-31 at 16:48 -0400, Nicolas Dufresne wrote:
> > Hi Yunfei,
> > 
> > thanks for the update, I should be testing this really soon.
> > 
> > Le jeudi 31 mars 2022 à 10:47 +0800, Yunfei Dong a écrit :
> > > This series adds support for mt8192 h264/vp8/vp9 decoder drivers.
> > > Firstly, refactor
> > > power/clock/interrupt interfaces for mt8192 is lat and core
> > > architecture.
> > 
> > Similarly to MT8173 and MT8183, a shared* firmware is needed for this
> > CODEC to
> > work (scp.img). I looked into linux-firmware[1] it has not been added
> > for mt8192
> > yet. As your patches are getting close to be ready, it would be
> > important to
> > look into this so the patchset does not get blocked due to that.
> > 
> > best regards,
> > Nicolas
> > 
> > [1] 
> > https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/mediatek
> > * Shared at least between MDP3 and MTK VCODEC from my knowledge
> > 
> 
> Thanks for your remind.
> 
> I have already sent mt8192 scp.img to github.
> 
> https://github.com/yunfeidongmediatek/linux_fw_scp_8192/commit/3ac2fc85bc7dfcebdb92b5b5808b0268cdfb772d
> 
> Waiting for to be merged.

On boards I have, the firmware is loaded from /lib/firmware/scp.img, but with
this submission it will be in lib/firmware/mediatek/mt8192/scp.img . I haven't
found anything around:

 drivers/remoteproc/mtk_scp.c:812:       char *fw_name = "scp.img";

That would use the platform path. This seems like a problem to me, the
upstreaming of the firmware isn't being aligned with the were the firmware is
picked by the upstream driver. Correct me if I got this wrong, but I'd really
like to clarify this.

Nicolas

> 
> Best Regards,
> Yunfei Dong
> 
> > > 
> > > Secondly, add new functions to get frame buffer size and resolution
> > > according
> > > to decoder capability from scp side. Then add callback function to
> > > get/put
> > > capture buffer in order to enable lat and core decoder in parallel,
> > > need to
> > > adjust GStreamer at the same time. 
> > > 
> > > Then add to support MT21C compressed mode and fix v4l2-compliance
> > > fail.
> > > 
> > > Next, extract H264 request api driver to let mt8183 and mt8192 use
> > > the same
> > > code, and adds mt8192 frame based h264 driver for stateless
> > > decoder.
> > > 
> > > Lastly, add vp8 and vp9 stateless decoder drivers.
> > > 
> > > Patches 1 refactor power/clock/interrupt interface.
> > > Patches 2~4 get frame buffer size and resolution according to
> > > decoder capability.
> > > Patches 5 set capture queue bytesused.
> > > Patches 6 adjust GStreamer.
> > > Patch 7~11 add to support MT21C compressed mode and fix v4l2-
> > > compliance fail.
> > > patch 12 record capture queue format type.
> > > Patch 13~14 extract h264 driver and add mt8192 frame based driver
> > > for h264 decoder.
> > > Patch 15~16 add vp8 and vp9 stateless decoder drivers.
> > > Patch 17 prevent kernel crash when rmmod mtk-vcodec-dec.ko
> > > ---
> > > changes compared with v6:
> > > - adjust GStreamer, separate src buffer done with
> > > v4l2_ctrl_request_complete for patch 6.
> > > - remove v4l2_m2m_set_dst_buffered.
> > > - add new patch to set each plane bytesused in buf prepare for
> > > patch 5.
> > > - using upstream interface to update vp9 prob tables for patch 16.
> > > - fix maintainer comments.
> > > - test the driver with chrome VD and GStreamer(H264/VP9/VP8/AV1).
> > > changes compared with v6:
> > > - rebase to the latest media stage and fix conficts
> > > - fix memcpy to memcpy_fromio or memcpy_toio
> > > - fix h264 crash when test field bitstream
> > > changes compared with v5:
> > > - fix vp9 comments for patch 15
> > > - fix vp8 comments for patch 14.
> > > - fix comments for patch 12.
> > > - fix build errors.
> > > changes compared with v4:
> > > - fix checkpatch.pl fail.
> > > - fix kernel-doc fail.
> > > - rebase to the latest media codec driver.
> > > changes compared with v3:
> > > - remove enum mtk_chip for patch 2.
> > > - add vp8 stateless decoder drivers for patch 14.
> > > - add vp9 stateless decoder drivers for patch 15.
> > > changes compared with v2:
> > > - add new patch 11 to record capture queue format type.
> > > - separate patch 4 according to tzung-bi's suggestion.
> > > - re-write commit message for patch 5 according to tzung-bi's
> > > suggestion.
> > > changes compared with v1:
> > > - rewrite commit message for patch 12.
> > > - rewrite cover-letter message.
> > > ---
> > > Yunfei Dong (17):
> > >   media: mediatek: vcodec: Add vdec enable/disable hardware helpers
> > >   media: mediatek: vcodec: Using firmware type to separate
> > > different
> > >     firmware architecture
> > >   media: mediatek: vcodec: get capture queue buffer size from scp
> > >   media: mediatek: vcodec: Read max resolution from dec_capability
> > >   media: mediatek: vcodec: set each plane bytesused in buf prepare
> > >   media: mediatek: vcodec: Refactor get and put capture buffer flow
> > >   media: mediatek: vcodec: Refactor supported vdec formats and
> > >     framesizes
> > >   media: mediatek: vcodec: Getting supported decoder format types
> > >   media: mediatek: vcodec: Add format to support MT21C
> > >   media: mediatek: vcodec: disable vp8 4K capability
> > >   media: mediatek: vcodec: Fix v4l2-compliance fail
> > >   media: mediatek: vcodec: record capture queue format type
> > >   media: mediatek: vcodec: Extract H264 common code
> > >   media: mediatek: vcodec: support stateless H.264 decoding for
> > > mt8192
> > >   media: mediatek: vcodec: support stateless VP8 decoding
> > >   media: mediatek: vcodec: support stateless VP9 decoding
> > >   media: mediatek: vcodec: prevent kernel crash when rmmod
> > >     mtk-vcodec-dec.ko
> > > 
> > >  .../media/platform/mediatek/vcodec/Makefile   |    4 +
> > >  .../platform/mediatek/vcodec/mtk_vcodec_dec.c |   62 +-
> > >  .../mediatek/vcodec/mtk_vcodec_dec_drv.c      |    8 +-
> > >  .../mediatek/vcodec/mtk_vcodec_dec_pm.c       |  166 +-
> > >  .../mediatek/vcodec/mtk_vcodec_dec_pm.h       |    6 +-
> > >  .../mediatek/vcodec/mtk_vcodec_dec_stateful.c |   19 +-
> > >  .../vcodec/mtk_vcodec_dec_stateless.c         |  257 +-
> > >  .../platform/mediatek/vcodec/mtk_vcodec_drv.h |   41 +-
> > >  .../mediatek/vcodec/mtk_vcodec_enc_drv.c      |    5 -
> > >  .../platform/mediatek/vcodec/mtk_vcodec_fw.c  |    6 +
> > >  .../platform/mediatek/vcodec/mtk_vcodec_fw.h  |    1 +
> > >  .../vcodec/vdec/vdec_h264_req_common.c        |  310 +++
> > >  .../vcodec/vdec/vdec_h264_req_common.h        |  272 +++
> > >  .../mediatek/vcodec/vdec/vdec_h264_req_if.c   |  438 +---
> > >  .../vcodec/vdec/vdec_h264_req_multi_if.c      |  619 +++++
> > >  .../mediatek/vcodec/vdec/vdec_vp8_req_if.c    |  437 ++++
> > >  .../vcodec/vdec/vdec_vp9_req_lat_if.c         | 2072
> > > +++++++++++++++++
> > >  .../platform/mediatek/vcodec/vdec_drv_if.c    |   37 +-
> > >  .../platform/mediatek/vcodec/vdec_drv_if.h    |    3 +
> > >  .../platform/mediatek/vcodec/vdec_ipi_msg.h   |   36 +
> > >  .../platform/mediatek/vcodec/vdec_msg_queue.c |    2 +
> > >  .../platform/mediatek/vcodec/vdec_msg_queue.h |    2 +
> > >  .../platform/mediatek/vcodec/vdec_vpu_if.c    |   53 +-
> > >  .../platform/mediatek/vcodec/vdec_vpu_if.h    |   15 +
> > >  .../platform/mediatek/vcodec/venc_vpu_if.c    |    2 +-
> > >  include/linux/remoteproc/mtk_scp.h            |    2 +
> > >  26 files changed, 4274 insertions(+), 601 deletions(-)
> > >  create mode 100644
> > > drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_common.c
> > >  create mode 100644
> > > drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_common.h
> > >  create mode 100644
> > > drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_multi_if.
> > > c
> > >  create mode 100644
> > > drivers/media/platform/mediatek/vcodec/vdec/vdec_vp8_req_if.c
> > >  create mode 100644
> > > drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
> > > 
> > 
> > 
> 