[PATCH 1/2] mt76: mt7915: add .offset_tsf callback
Lorenzo Bianconi
lorenzo.bianconi at redhat.com
Tue May 25 02:01:32 PDT 2021
> It's much more accurate than .get_tsf + .set_tsf, and switch to use
> mt76_rmw to operate tsf registers.
>
> Tested-by: Xing Song <xing.song at mediatek.com>
> Signed-off-by: Ryder Lee <ryder.lee at mediatek.com>
> ---
> .../net/wireless/mediatek/mt76/mt7915/main.c | 33 +++++++++++++++++--
> .../net/wireless/mediatek/mt76/mt7915/regs.h | 2 ++
> 2 files changed, 33 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> index 64f9ebe4424a..2485f65766e7 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> @@ -816,7 +816,8 @@ mt7915_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
>
> n = mvif->omac_idx > HW_BSSID_MAX ? HW_BSSID_0 : mvif->omac_idx;
> /* TSF software read */
> - mt76_set(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_MODE);
> + mt76_rmw(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_MODE,
> + MT_LPON_TCR_SW_READ);
> tsf.t32[0] = mt76_rr(dev, MT_LPON_UTTR0(band));
> tsf.t32[1] = mt76_rr(dev, MT_LPON_UTTR1(band));
>
> @@ -845,7 +846,34 @@ mt7915_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> mt76_wr(dev, MT_LPON_UTTR0(band), tsf.t32[0]);
> mt76_wr(dev, MT_LPON_UTTR1(band), tsf.t32[1]);
> /* TSF software overwrite */
> - mt76_set(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_WRITE);
> + mt76_rmw(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_MODE,
> + MT_LPON_TCR_SW_WRITE);
> +
> + mutex_unlock(&dev->mt76.mutex);
> +}
> +
> +static void
> +mt7915_offset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> + s64 timestamp)
> +{
> + struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
> + struct mt7915_dev *dev = mt7915_hw_dev(hw);
> + struct mt7915_phy *phy = mt7915_hw_phy(hw);
> + bool band = phy != &dev->phy;
> + union {
> + u64 t64;
> + u32 t32[2];
> + } tsf = { .t64 = timestamp, };
nit: new line here after '{' and before '}'
Regards,
Lorenzo
> + u16 n;
> +
> + mutex_lock(&dev->mt76.mutex);
> +
> + n = mvif->omac_idx > HW_BSSID_MAX ? HW_BSSID_0 : mvif->omac_idx;
> + mt76_wr(dev, MT_LPON_UTTR0(band), tsf.t32[0]);
> + mt76_wr(dev, MT_LPON_UTTR1(band), tsf.t32[1]);
> + /* TSF software adjust*/
> + mt76_rmw(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_MODE,
> + MT_LPON_TCR_SW_ADJUST);
>
> mutex_unlock(&dev->mt76.mutex);
> }
> @@ -1036,6 +1064,7 @@ const struct ieee80211_ops mt7915_ops = {
> .get_stats = mt7915_get_stats,
> .get_tsf = mt7915_get_tsf,
> .set_tsf = mt7915_set_tsf,
> + .offset_tsf = mt7915_offset_tsf,
> .get_survey = mt76_get_survey,
> .get_antenna = mt76_get_antenna,
> .set_antenna = mt7915_set_antenna,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
> index efe0f2904c66..e36b30d84f07 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
> @@ -124,6 +124,8 @@
> #define MT_LPON_TCR(_band, n) MT_WF_LPON(_band, 0x0a8 + (n) * 4)
> #define MT_LPON_TCR_SW_MODE GENMASK(1, 0)
> #define MT_LPON_TCR_SW_WRITE BIT(0)
> +#define MT_LPON_TCR_SW_ADJUST BIT(1)
> +#define MT_LPON_TCR_SW_READ GENMASK(1, 0)
>
> /* MIB: band 0(0x24800), band 1(0xa4800) */
> #define MT_WF_MIB_BASE(_band) ((_band) ? 0xa4800 : 0x24800)
> --
> 2.18.0
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20210525/59f74045/attachment-0001.sig>
More information about the Linux-mediatek
mailing list