[PATCH 1/2] mt76: mt7915: add .offset_tsf callback
Ryder Lee
ryder.lee at mediatek.com
Tue May 25 01:45:14 PDT 2021
It's much more accurate than .get_tsf + .set_tsf, and switch to use
mt76_rmw to operate tsf registers.
Tested-by: Xing Song <xing.song at mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee at mediatek.com>
---
.../net/wireless/mediatek/mt76/mt7915/main.c | 33 +++++++++++++++++--
.../net/wireless/mediatek/mt76/mt7915/regs.h | 2 ++
2 files changed, 33 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 64f9ebe4424a..2485f65766e7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -816,7 +816,8 @@ mt7915_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
n = mvif->omac_idx > HW_BSSID_MAX ? HW_BSSID_0 : mvif->omac_idx;
/* TSF software read */
- mt76_set(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_MODE);
+ mt76_rmw(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_MODE,
+ MT_LPON_TCR_SW_READ);
tsf.t32[0] = mt76_rr(dev, MT_LPON_UTTR0(band));
tsf.t32[1] = mt76_rr(dev, MT_LPON_UTTR1(band));
@@ -845,7 +846,34 @@ mt7915_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
mt76_wr(dev, MT_LPON_UTTR0(band), tsf.t32[0]);
mt76_wr(dev, MT_LPON_UTTR1(band), tsf.t32[1]);
/* TSF software overwrite */
- mt76_set(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_WRITE);
+ mt76_rmw(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_MODE,
+ MT_LPON_TCR_SW_WRITE);
+
+ mutex_unlock(&dev->mt76.mutex);
+}
+
+static void
+mt7915_offset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ s64 timestamp)
+{
+ struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
+ struct mt7915_dev *dev = mt7915_hw_dev(hw);
+ struct mt7915_phy *phy = mt7915_hw_phy(hw);
+ bool band = phy != &dev->phy;
+ union {
+ u64 t64;
+ u32 t32[2];
+ } tsf = { .t64 = timestamp, };
+ u16 n;
+
+ mutex_lock(&dev->mt76.mutex);
+
+ n = mvif->omac_idx > HW_BSSID_MAX ? HW_BSSID_0 : mvif->omac_idx;
+ mt76_wr(dev, MT_LPON_UTTR0(band), tsf.t32[0]);
+ mt76_wr(dev, MT_LPON_UTTR1(band), tsf.t32[1]);
+ /* TSF software adjust*/
+ mt76_rmw(dev, MT_LPON_TCR(band, n), MT_LPON_TCR_SW_MODE,
+ MT_LPON_TCR_SW_ADJUST);
mutex_unlock(&dev->mt76.mutex);
}
@@ -1036,6 +1064,7 @@ const struct ieee80211_ops mt7915_ops = {
.get_stats = mt7915_get_stats,
.get_tsf = mt7915_get_tsf,
.set_tsf = mt7915_set_tsf,
+ .offset_tsf = mt7915_offset_tsf,
.get_survey = mt76_get_survey,
.get_antenna = mt76_get_antenna,
.set_antenna = mt7915_set_antenna,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
index efe0f2904c66..e36b30d84f07 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
@@ -124,6 +124,8 @@
#define MT_LPON_TCR(_band, n) MT_WF_LPON(_band, 0x0a8 + (n) * 4)
#define MT_LPON_TCR_SW_MODE GENMASK(1, 0)
#define MT_LPON_TCR_SW_WRITE BIT(0)
+#define MT_LPON_TCR_SW_ADJUST BIT(1)
+#define MT_LPON_TCR_SW_READ GENMASK(1, 0)
/* MIB: band 0(0x24800), band 1(0xa4800) */
#define MT_WF_MIB_BASE(_band) ((_band) ? 0xa4800 : 0x24800)
--
2.18.0
More information about the Linux-mediatek
mailing list