[PATCH v2 11/13] usb: mtu3: add support ip-sleep wakeup for MT8192

[Chunfeng Yun]

Add add support ip-sleep wakeup for MT8192, it's a specific
revision, not following IPM rule.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2:
   1. fix typo suggested by Sergei
   2. modify revision format
---
 drivers/usb/mtu3/mtu3_host.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index 398ce0014606..e3c923e6529f 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -30,6 +30,10 @@
 #define WC0_IS_P	BIT(12)	/* polarity */
 #define WC0_IS_EN	BIT(6)
 
+/* mt8192 */
+#define WC0_SSUSB0_CDEN		BIT(6)
+#define WC0_IS_SPM_EN		BIT(1)
+
 /* mt2712 etc */
 #define PERI_SSUSB_SPM_CTRL	0x0
 #define SSC_IP_SLEEP_EN	BIT(4)
@@ -39,6 +43,7 @@ enum ssusb_uwk_vers {
 	SSUSB_UWK_V1 = 1,
 	SSUSB_UWK_V2,
 	SSUSB_UWK_V1_1 = 101,	/* specific revision 1.01 */
+	SSUSB_UWK_V1_2,		/* specific revision 1.02 */
 };
 
 /*
@@ -60,6 +65,11 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
 		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
 		val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
 		break;
+	case SSUSB_UWK_V1_2:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
+		msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
+		val = enable ? msk : 0;
+		break;
 	case SSUSB_UWK_V2:
 		reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
 		msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
-- 
2.18.0