[PATCH v2 12/13] usb: mtu3: drop CONFIG_OF

[Chunfeng Yun]

The driver can match only the devices created by the OF core
via the DT table, so the table should be always used.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: no changes
---
 drivers/usb/mtu3/mtu3_plat.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index d44d5417438d..7786a95a874e 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -502,25 +502,20 @@ static const struct dev_pm_ops mtu3_pm_ops = {
 
 #define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL)
 
-#ifdef CONFIG_OF
-
 static const struct of_device_id mtu3_of_match[] = {
 	{.compatible = "mediatek,mt8173-mtu3",},
 	{.compatible = "mediatek,mtu3",},
 	{},
 };
-
 MODULE_DEVICE_TABLE(of, mtu3_of_match);
 
-#endif
-
 static struct platform_driver mtu3_driver = {
 	.probe = mtu3_probe,
 	.remove = mtu3_remove,
 	.driver = {
 		.name = MTU3_DRIVER_NAME,
 		.pm = DEV_PM_OPS,
-		.of_match_table = of_match_ptr(mtu3_of_match),
+		.of_match_table = mtu3_of_match,
 	},
 };
 module_platform_driver(mtu3_driver);
-- 
2.18.0