[PATCH 22/24] iommu/mediatek: Get the proper bankid for multi banks

Yong Wu yong.wu at mediatek.com
Tue Jun 29 19:35:02 PDT 2021


We preassign some portes in a special bank via the new defined
bank_portmsk.

If the iommu id in the iommu consumer's dtsi node is inside this
bank_portmsk, then we switch it to this special iommu bank, and initialise
the IOMMU bank HW.

Each a bank has the independent pgtable(4GB iova range). Each a bank
is a independent iommu domain/group. Currently we don't separate different
iova ranges inside a bank.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 38 +++++++++++++++++++++++++++++++++++---
 drivers/iommu/mtk_iommu.h |  1 +
 2 files changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 8137cfc9c8b9..e297a50adced 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -344,6 +344,30 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static unsigned int mtk_iommu_get_bank_id(struct device *dev,
+					  const struct mtk_iommu_plat_data *plat_data)
+{
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	unsigned int i, portmsk = 0, bankid = 0; /* bank default is 0 */
+
+	if (plat_data->bank_nr == 1)
+		return bankid;
+
+	for (i = 0; i < fwspec->num_ids; i++)
+		portmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
+
+	for (i = 0; i < plat_data->bank_nr; i++) {
+		if (!plat_data->bank_enable[i])
+			continue;
+
+		if (portmsk & plat_data->bank_portmsk[i]) {
+			bankid = i;
+			break;
+		}
+	}
+	return bankid;
+}
+
 static int mtk_iommu_get_iova_region_id(struct device *dev,
 					const struct mtk_iommu_plat_data *plat_data)
 {
@@ -509,13 +533,14 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
 	struct mtk_iommu_domain *dom = to_mtk_domain(domain);
 	struct mtk_iommu_bank_data *bank;
 	struct device *m4udev = data->dev;
-	unsigned int bankid = 0;
+	unsigned int bankid;
 	int ret, region_id;
 
 	region_id = mtk_iommu_get_iova_region_id(dev, data->plat_data);
 	if (region_id < 0)
 		return region_id;
 
+	bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
 	bank = &data->bank[bankid];
 	if (!dom->bank) {
 		if (mtk_iommu_domain_finalise(dom, data, region_id))
@@ -644,6 +669,7 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
 	struct mtk_iommu_data *c_data = dev_iommu_priv_get(dev), *data;
 	struct list_head *hw_list = c_data->hw_list;
 	struct iommu_group *group;
+	unsigned int bankid, groupid;
 	int regionid;
 
 	data = mtk_iommu_get_frst_data(hw_list);
@@ -653,12 +679,18 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
 	regionid = mtk_iommu_get_iova_region_id(dev, data->plat_data);
 	if (regionid < 0)
 		return ERR_PTR(regionid);
+	bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
 
-	group = data->m4u_group[regionid];
+	/*
+	 * If the bank function is enabled, each a bank is a iommu group/domain.
+	 * otherwise, each a iova region is a iommu group/domain.
+	 */
+	groupid = bankid ? bankid : regionid;
+	group = data->m4u_group[groupid];
 	if (!group) {
 		group = iommu_group_alloc();
 		if (!IS_ERR(group))
-			data->m4u_group[regionid] = group;
+			data->m4u_group[groupid] = group;
 	} else {
 		iommu_group_ref_get(group);
 	}
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 78d9481d67b5..8235957f1592 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -65,6 +65,7 @@ struct mtk_iommu_plat_data {
 
 	u32                 bank_nr;
 	bool                bank_enable[MTK_IOMMU_BANK_MAX];
+	unsigned int        bank_portmsk[MTK_IOMMU_BANK_MAX];
 	unsigned char       larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
 };
 
-- 
2.18.0


More information about the Linux-mediatek mailing list