[PATCH 23/24] iommu/mediatek: Add multi bank support
Yong Wu
yong.wu at mediatek.com
Tue Jun 29 19:35:03 PDT 2021
The registers for each bank of the IOMMU base are in order, delta is
0x1000. Initialise the base for each bank.
Meanwhile, Each bank has some independent registers. thus,
backup/restore them for each a bank.
For all the previous SoC, we only have bank0. thus use "do {} while()"
to allow bank0 always go.
Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
drivers/iommu/mtk_iommu.c | 78 +++++++++++++++++++++++++++++----------
drivers/iommu/mtk_iommu.h | 6 +--
2 files changed, 61 insertions(+), 23 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index e297a50adced..3aaf425d5a18 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -114,6 +114,7 @@
#define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f)
#define MTK_PROTECT_PA_ALIGN 256
+#define MTK_IOMMU_BANK_SZ 0x1000
#define PERICFG_IOMMU_1 0x714
@@ -925,11 +926,11 @@ static int mtk_iommu_probe(struct platform_device *pdev)
struct mtk_iommu_data *data;
struct device *dev = &pdev->dev;
struct resource *res;
- resource_size_t ioaddr;
+ resource_size_t ioaddr, size;
struct component_match *match = NULL;
struct regmap *infracfg;
void *protect;
- int ret;
+ int ret, i = 0;
u32 val;
char *p;
struct mtk_iommu_bank_data *bank;
@@ -971,19 +972,30 @@ static int mtk_iommu_probe(struct platform_device *pdev)
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ size = resource_size(res);
+ if (size < data->plat_data->bank_nr * MTK_IOMMU_BANK_SZ) {
+ dev_err(dev, "banknr %d. res %pR is not enough.\n",
+ data->plat_data->bank_nr, res);
+ return -EINVAL;
+ }
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
ioaddr = res->start;
- bank = &data->bank[0];
- bank->base = base;
- bank->irq = platform_get_irq(pdev, 0);
- if (bank->irq < 0)
- return bank->irq;
- bank->pdev = dev;
- bank->pdata = data;
- spin_lock_init(&bank->tlb_lock);
+ do {
+ if (!data->plat_data->bank_enable[i])
+ continue;
+ bank = &data->bank[i];
+ bank->base = base + i * MTK_IOMMU_BANK_SZ;
+
+ bank->irq = platform_get_irq(pdev, i);
+ if (bank->irq < 0)
+ return bank->irq;
+ bank->pdev = dev;
+ bank->pdata = data;
+ spin_lock_init(&bank->tlb_lock);
+ } while (++i < data->plat_data->bank_nr);
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_BCLK)) {
data->bclk = devm_clk_get(dev, "bclk");
@@ -1068,7 +1080,9 @@ static int mtk_iommu_probe(struct platform_device *pdev)
static int mtk_iommu_remove(struct platform_device *pdev)
{
struct mtk_iommu_data *data = platform_get_drvdata(pdev);
- struct mtk_iommu_bank_data *bank = &data->bank[0];
+ struct mtk_iommu_bank_data *bank;
+ bool bank_hwinit;
+ int i;
iommu_device_sysfs_remove(&data->iommu);
iommu_device_unregister(&data->iommu);
@@ -1080,7 +1094,18 @@ static int mtk_iommu_remove(struct platform_device *pdev)
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM))
device_link_remove(data->smicomm_dev, &pdev->dev);
pm_runtime_disable(&pdev->dev);
- devm_free_irq(&pdev->dev, bank->irq, bank);
+ for (i = 0; i < data->plat_data->bank_nr; i++) {
+ bank = &data->bank[i];
+ /*
+ * Use a register value to confirm if this bank HW is initialised.
+ * If the bank has no consumer, the bank HW still won't be
+ * initialised even though bank_enable is true.
+ */
+ bank_hwinit = !!readl_relaxed(bank->base + REG_MMU_PT_BASE_ADDR);
+ if (!bank_hwinit)
+ continue;
+ devm_free_irq(&pdev->dev, bank->irq, bank);
+ }
component_master_del(&pdev->dev, &mtk_iommu_com_ops);
return 0;
}
@@ -1090,15 +1115,21 @@ static int __maybe_unused mtk_iommu_runtime_suspend(struct device *dev)
struct mtk_iommu_data *data = dev_get_drvdata(dev);
struct mtk_iommu_suspend_reg *reg = &data->reg;
void __iomem *base = data->bank[0].base;
+ int i = 0;
reg->wr_len_ctrl = readl_relaxed(base + REG_MMU_WR_LEN_CTRL);
reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
- reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
- reg->int_main_control = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
- reg->ivrp_paddr = readl_relaxed(base + REG_MMU_IVRP_PADDR);
reg->vld_pa_rng = readl_relaxed(base + REG_MMU_VLD_PA_RNG);
+ do {
+ if (!data->plat_data->bank_enable[i])
+ continue;
+ base = data->bank[i].base;
+ reg->int_control0[i] = readl_relaxed(base + REG_MMU_INT_CONTROL0);
+ reg->int_main_control[i] = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
+ reg->ivrp_paddr[i] = readl_relaxed(base + REG_MMU_IVRP_PADDR);
+ } while (++i < data->plat_data->bank_nr);
clk_disable_unprepare(data->bclk);
return 0;
}
@@ -1109,7 +1140,7 @@ static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
struct mtk_iommu_suspend_reg *reg = &data->reg;
struct mtk_iommu_domain *m4u_dom = data->bank[0].m4u_dom;
void __iomem *base = data->bank[0].base;
- int ret;
+ int ret, i = 0;
ret = clk_prepare_enable(data->bclk);
if (ret) {
@@ -1128,11 +1159,18 @@ static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
- writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
- writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
- writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
writel_relaxed(reg->vld_pa_rng, base + REG_MMU_VLD_PA_RNG);
- writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK, base + REG_MMU_PT_BASE_ADDR);
+ do {
+ if (!data->plat_data->bank_enable[i])
+ continue;
+ base = data->bank[i].base;
+ m4u_dom = data->bank[i].m4u_dom;
+ writel_relaxed(reg->int_control0[i], base + REG_MMU_INT_CONTROL0);
+ writel_relaxed(reg->int_main_control[i], base + REG_MMU_INT_MAIN_CONTROL);
+ writel_relaxed(reg->ivrp_paddr[i], base + REG_MMU_IVRP_PADDR);
+ writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
+ base + REG_MMU_PT_BASE_ADDR);
+ } while (++i < data->plat_data->bank_nr);
return 0;
}
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 8235957f1592..813e60de89d6 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -33,11 +33,11 @@ struct mtk_iommu_suspend_reg {
};
u32 dcm_dis;
u32 ctrl_reg;
- u32 int_control0;
- u32 int_main_control;
- u32 ivrp_paddr;
u32 vld_pa_rng;
u32 wr_len_ctrl;
+ u32 int_control0[MTK_IOMMU_BANK_MAX];
+ u32 int_main_control[MTK_IOMMU_BANK_MAX];
+ u32 ivrp_paddr[MTK_IOMMU_BANK_MAX];
};
enum mtk_iommu_plat {
--
2.18.0
More information about the Linux-mediatek
mailing list