[PATCH 2/3] Bluetooth: btmtksdio: Enable SCO over I2S function

[Paul Menzel]

Dear Sean,


Am 20.12.21 um 18:52 schrieb sean.wang at mediatek.com:
> From: Sean Wang <sean.wang at mediatek.com>

>> Am 18.12.21 um 02:08 schrieb sean.wang at mediatek.com:
>>> From: Mark Chen <mark-yw.chen at mediatek.com>
>>> 
>>> For MediaTek chipset, the driver has to issue the specific
>>> command to enable Bluetooth SCO support over the I2S/PCM
>>> interface.
>> 
>> Please document the datasheet name, revision and section, where
>> this is described.
> 
> the datasheet is not released in public so Mark and I cannot provide
> the detail here, but we will make the patch easy to review and
> understand.

Too bad. The name and revision of the datasheet would still be good to 
have documented.

>> Please add how SCO support can be tested. Are all Mediatek chipsets
>> supported?
> 
> the SCO profile was tested by setting up a VOIP application,
> connected to HFP device, checked telephony function can work
> normally.
> 
> currently, SCO is only supported by mt7921, we will change the
> subject to "Bluetooth: mt7921s: Enable SCO over I2S function" to
> avoid any misunderstanding.

Thank you.

I also saw a linux-firmare patch updating the firmware. If a specific
firmware version is required, please mention it too.

[…]


Kind regards,

Paul