[PATCH RESEND 1/3] Bluetooth: btmtksdio: add the support of wake on bluetooth

[Paul Menzel]

Dear Sean, dear Mark,


Am 18.12.21 um 02:08 schrieb sean.wang at mediatek.com:
> From: Mark Chen <mark-yw.chen at mediatek.com>

Shorter summary: Bluetooth: btmtksdio: Support wake on bluetooth

> Add the support to enable wake on bluetooth

Can you please list the datasheet name and revision used for the 
implementation.

Please document how you tested this.

> Co-developed-by: Sean Wang <sean.wang at mediatek.com>
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> Signed-off-by: Mark Chen <mark-yw.chen at mediatek.com>
> ---
>   drivers/bluetooth/btmtk.h     |  8 ++++++++
>   drivers/bluetooth/btmtksdio.c | 31 ++++++++++++++++++++++++++++++-
>   2 files changed, 38 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
> index 6e7b0c7567c0..2be1d2680ad8 100644
> --- a/drivers/bluetooth/btmtk.h
> +++ b/drivers/bluetooth/btmtk.h
> @@ -68,6 +68,14 @@ struct btmtk_tci_sleep {
>   	u8 time_compensation;
>   } __packed;
>   
> +struct btmtk_wakeon {
> +	u8 mode;
> +	u8 gpo;
> +	u8 active_high;
> +	__le16 enable_delay;
> +	__le16 wakeup_delay;
> +} __packed;
> +
>   struct btmtk_hci_wmt_params {
>   	u8 op;
>   	u8 flag;
> diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
> index b5ea8d3bffaa..771733ce362b 100644
> --- a/drivers/bluetooth/btmtksdio.c
> +++ b/drivers/bluetooth/btmtksdio.c
> @@ -958,6 +958,30 @@ static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
>   	return 0;
>   }
>   
> +static bool btmtk_sdio_wakeup(struct hci_dev *hdev)
> +{
> +	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
> +	bool may_wakeup = device_may_wakeup(bdev->dev);
> +	struct btmtk_wakeon bt_awake = {
> +		.mode = 0x1,
> +		.gpo = 0,
> +		.active_high = 0x1,
> +		.enable_delay = cpu_to_le16(0xc80),
> +		.wakeup_delay = cpu_to_le16(0x20)
> +	};
> +	struct sk_buff *skb;
> +
> +	if (may_wakeup &&
> +	    bdev->data->chipid == 0x7921) {

Why the check for 0x7921? Is that device only supported? The commit 
message does not say anything about it.

> +		skb =  __hci_cmd_sync(hdev, 0xfc27, sizeof(bt_awake),
> +				      &bt_awake, HCI_CMD_TIMEOUT);
> +		if (IS_ERR(skb))
> +			may_wakeup = false;
> +	}
> +
> +	return may_wakeup;
> +}
> +
>   static int btmtksdio_probe(struct sdio_func *func,
>   			   const struct sdio_device_id *id)
>   {
> @@ -998,6 +1022,7 @@ static int btmtksdio_probe(struct sdio_func *func,
>   	hdev->shutdown = btmtksdio_shutdown;
>   	hdev->send     = btmtksdio_send_frame;
>   	hdev->set_bdaddr = btmtk_set_bdaddr;
> +	hdev->wakeup = btmtk_sdio_wakeup;
>   
>   	SET_HCIDEV_DEV(hdev, &func->dev);
>   
> @@ -1032,7 +1057,11 @@ static int btmtksdio_probe(struct sdio_func *func,
>   	 */
>   	pm_runtime_put_noidle(bdev->dev);
>   
> -	return 0;
> +	err = device_init_wakeup(bdev->dev, true);
> +	if (err)
> +		bt_dev_err(hdev, "%s: failed to init_wakeup", __func__);

Could the error message be extended, so normal users know what to do? 
Currently it’s only useful for developers.

> +
> +	return err;
>   }
>   
>   static void btmtksdio_remove(struct sdio_func *func)


Kind regards,

Paul