[PATCH v11 2/4] dt-bindings: pinctrl: mt8195: change pull up/down description

Rob Herring robh at kernel.org
Tue Aug 31 15:13:00 PDT 2021


On Mon, Aug 30, 2021 at 08:36:01AM +0800, Zhiyong Tao wrote:
> Change pull up/down description

Every commit is a 'change'. Your commit msg should explain 'why', not 
what the diff is.

> 
> Signed-off-by: Zhiyong Tao <zhiyong.tao at mediatek.com>
> ---
>  .../bindings/pinctrl/pinctrl-mt8195.yaml      | 32 +++++++++++++++++--
>  1 file changed, 29 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> index 2f12ec59eee5..a341ed9f0095 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> @@ -85,9 +85,35 @@ patternProperties:
>            2/4/6/8/10/12/14/16mA in mt8195.
>          enum: [0, 1, 2, 3, 4, 5, 6, 7]
>  
> -      bias-pull-down: true
> -
> -      bias-pull-up: true
> +      bias-pull-down:
> +        description: |
> +          For pull down type is normal, it don't need add RSEL & R1R0 define
> +          and resistance value.
> +          For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
> +          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> +          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
> +          define in mt8195.
> +          For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
> +          to set different resistance. It can support "MTK_PULL_SET_RSEL_000" &
> +          "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> +          "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> +          "MTK_PULL_SET_RSEL_111" define in mt8195. It can also support resistance value(ohm)
> +          "75000" & "5000" in mt8195.

Sounds like constraints on the values. Please write a schema.

> +
> +      bias-pull-up:
> +        description: |
> +          For pull up type is normal, it don't need add RSEL & R1R0 define
> +          and resistance value.
> +          For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
> +          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> +          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
> +          define in mt8195.
> +          For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
> +          to set different resistance. It can support "MTK_PULL_SET_RSEL_000" &
> +          "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> +          "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> +          "MTK_PULL_SET_RSEL_111" define in mt8195. It can also support resistance value(ohm)
> +          "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.
>  
>        bias-disable: true
>  
> -- 
> 2.18.0
> 
> 



More information about the Linux-mediatek mailing list