[PATCH v3 1/4] dt bindings: remoteproc: Add bindings for MT8183 APU

[Rob Herring]

On Thu, 19 Aug 2021 17:13:37 +0200, Alexandre Bailon wrote:
> This adds dt bindings for the APU present in the MT8183.
> 
> Signed-off-by: Alexandre Bailon <abailon at baylibre.com>
> ---
>  .../bindings/remoteproc/mtk,apu.yaml          | 118 ++++++++++++++++++
>  1 file changed, 118 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/remoteproc/mtk,apu.example.dt.yaml:0:0: /example-0/reserved-memory/vdev0vring0: failed to match any schema with compatible: ['shared-dma-pool']
Documentation/devicetree/bindings/remoteproc/mtk,apu.example.dt.yaml:0:0: /example-0/reserved-memory/vdev0vring1: failed to match any schema with compatible: ['shared-dma-pool']
Documentation/devicetree/bindings/remoteproc/mtk,apu.example.dt.yaml:0:0: /example-0/reserved-memory/vdev0buffer: failed to match any schema with compatible: ['shared-dma-pool']
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/mtk,apu.example.dt.yaml: apu at 19100000: memory-region: [[1], [2], [3]] is too long
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/mtk,apu.example.dt.yaml: apu at 19100000: Additional properties are not allowed ('memory-region-names' was unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1518714

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.