[PATCH v3 1/4] dt bindings: remoteproc: Add bindings for MT8183 APU

[Alexandre Bailon]

This adds dt bindings for the APU present in the MT8183.

Signed-off-by: Alexandre Bailon <abailon at baylibre.com>
---
 .../bindings/remoteproc/mtk,apu.yaml          | 118 ++++++++++++++++++
 1 file changed, 118 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
new file mode 100644
index 0000000000000..d5da6be66610c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+
+---
+$id: "http://devicetree.org/schemas/remoteproc/mtk,apu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MT8183 AI Processor Unit (APU) a.k.a. Vision Processor Unit (VPU)
+
+description:
+  This document defines the binding for the APU, a co-processor that could
+  offload the CPU for machine learning and neural network.
+
+maintainers:
+  - Alexandre Bailon <abailon at bayLibre.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8183-apu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Three clocks are expected for AXI, IPU and JTAG.
+      The JTAG clock seems to be required to run the DSP,
+      even when JTAG is not in use."
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ipu
+      - const: jtag
+
+  iommus:
+    maxItems: 3
+
+  memory-region:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  pinctrl:
+    description: pinctrl handles, required to configure pins for JTAG.
+
+  pinctrl-names:
+    items:
+      - const: jtag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - memory-region
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+    #include <dt-bindings/power/mt8183-power.h>
+
+    reserved-memory {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      vdev0vring0: vdev0vring0 {
+        compatible = "shared-dma-pool";
+        size = <0 0x00008000>;
+        no-map;
+      };
+
+      vdev0vring1: vdev0vring1 {
+        compatible = "shared-dma-pool";
+        size = <0 0x00008000>;
+        no-map;
+      };
+
+      vdev0buffer: vdev0buffer {
+        compatible = "shared-dma-pool";
+        size = <0 0x00100000>;
+        no-map;
+      };
+    };
+
+    apu0: apu at 19100000 {
+      compatible = "mediatek,mt8183-apu";
+      reg = <0x19180000 0x14000>;
+      interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_LOW>;
+
+      iommus = <&iommu M4U_PORT_IMG_IPUO>,
+         <&iommu M4U_PORT_IMG_IPU3O>,
+         <&iommu M4U_PORT_IMG_IPUI>;
+
+      clocks = <&ipu_core0 CLK_IPU_CORE0_AXI>,
+         <&ipu_core0 CLK_IPU_CORE0_IPU>,
+         <&ipu_core0 CLK_IPU_CORE0_JTAG>;
+
+      clock-names = "axi", "ipu", "jtag";
+
+      power-domains = <&scpsys MT8183_POWER_DOMAIN_VPU_CORE0>;
+      memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>;
+      memory-region-names = "vdev0buffer", "vdev0vring0", "vdev0vring1";
+    };
+...
-- 
2.31.1