[PATCH v2 3/7] usb: mtu3: fix the wrong HS mult value

Chunfeng Yun chunfeng.yun at mediatek.com
Thu Aug 12 06:11:31 PDT 2021


usb_endpoint_maxp() returns actual max packet size, @mult will
always be zero, fix it by using usb_endpoint_maxp_mult() instead
to get mult.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable <stable at vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: split two patch [v2 2/7],[v2 3/7] suggested by Felipe
---
 drivers/usb/mtu3/mtu3_gadget.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 635ad277cb13..a399fd84c71f 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -64,14 +64,12 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 	u32 interval = 0;
 	u32 mult = 0;
 	u32 burst = 0;
-	int max_packet;
 	int ret;
 
 	desc = mep->desc;
 	comp_desc = mep->comp_desc;
 	mep->type = usb_endpoint_type(desc);
-	max_packet = usb_endpoint_maxp(desc);
-	mep->maxp = max_packet & GENMASK(10, 0);
+	mep->maxp = usb_endpoint_maxp(desc);
 
 	switch (mtu->g.speed) {
 	case USB_SPEED_SUPER:
@@ -92,7 +90,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 				usb_endpoint_xfer_int(desc)) {
 			interval = desc->bInterval;
 			interval = clamp_val(interval, 1, 16) - 1;
-			mult = (max_packet & GENMASK(12, 11)) >> 11;
+			mult = usb_endpoint_maxp_mult(desc) - 1;
 		}
 		break;
 	default:
-- 
2.18.0


More information about the Linux-mediatek mailing list