[PATCH v2 1/7] usb: mtu3: restore HS function when set SS/SSP

[Chunfeng Yun]

Due to HS function is disabled when set as FS, need restore
it when set as SS/SSP.

Fixes: dc4c1aa7eae9 ("usb: mtu3: add ->udc_set_speed()")
Cc: stable <stable at vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: no changes
---
 drivers/usb/mtu3/mtu3_core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 562f4357831e..6403f01947b2 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -227,11 +227,13 @@ static void mtu3_set_speed(struct mtu3 *mtu, enum usb_device_speed speed)
 		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
 		break;
 	case USB_SPEED_SUPER:
+		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
 		mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
 			     SSUSB_U3_PORT_SSP_SPEED);
 		break;
 	case USB_SPEED_SUPER_PLUS:
-			mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
+		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+		mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
 			     SSUSB_U3_PORT_SSP_SPEED);
 		break;
 	default:
-- 
2.18.0