[PATCH v7 2/2] drm/bridge: Add I2C based driver for ps8640 bridge
jitao shi
jitao.shi at mediatek.com
Thu Jan 14 01:44:57 PST 2016
Hi Archit,
On Wed, 2016-01-13 at 12:41 +0530, Archit Taneja wrote:
> Hi Jitao,
>
> On 01/13/2016 07:48 AM, Jitao Shi wrote:
> > This patch adds drm_bridge driver for parade DSI to eDP bridge chip.
> >
> > Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> > ---
> > Changes since v6:
> > - Add ps8640 firmware update function
> > - Change i2c to i2c_transfer from i2c_master_recv/i2c_master_send
> > - Add comments for each page client
>
> I'd commented on the v6 patch set here:
>
> https://lkml.org/lkml/2015/12/15/62
>
> I wanted to know how the bridge driver was transferring parameters
> to the dsi host. Is that something that you are hardcoding on both
> the dsi host and ps8640 drivers for now?
>
> My intention of asking this is to know if there are other users
> that can take advantage of this patch set:
>
> https://lkml.org/lkml/2015/12/10/283
>
> Thanks,
> Archit
>
Thanks for you comments.
This patchsets is under test, it will cowork with other people and wiil
take more time. It will be include the next.
> > ---
> > drivers/gpu/drm/bridge/Kconfig | 10 +
> > drivers/gpu/drm/bridge/Makefile | 1 +
> > drivers/gpu/drm/bridge/parade-ps8640.c | 1106 ++++++++++++++++++++++++++++++++
> > 3 files changed, 1117 insertions(+)
> > create mode 100644 drivers/gpu/drm/bridge/parade-ps8640.c
> >
> > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> > index 6dddd39..dcfdbc9 100644
> > --- a/drivers/gpu/drm/bridge/Kconfig
> > +++ b/drivers/gpu/drm/bridge/Kconfig
> > @@ -41,4 +41,14 @@ config DRM_PARADE_PS8622
> > ---help---
> > Parade eDP-LVDS bridge chip driver.
> >
> > +config DRM_PARADE_PS8640
> > + tristate "Parade PS8640 MIPI DSI to eDP Converter"
> > + depends on OF
> > + select DRM_KMS_HELPER
> > + select DRM_PANEL
> > + ---help---
> > + Choose this option if you have PS8640 for display
> > + The PS8640 is a high-performance and low-power
> > + MIPI DSI to eDP converter
> > +
> > endmenu
> > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> > index d4e28be..272e3c01 100644
> > --- a/drivers/gpu/drm/bridge/Makefile
> > +++ b/drivers/gpu/drm/bridge/Makefile
> > @@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
> > obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
> > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> > +obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
> > diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
> > new file mode 100644
> > index 0000000..a18d8e9
> > --- /dev/null
> > +++ b/drivers/gpu/drm/bridge/parade-ps8640.c
> > @@ -0,0 +1,1106 @@
> > +/*
> > + * Copyright (c) 2014 MediaTek Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/firmware.h>
> > +#include <linux/gpio.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <asm/unaligned.h>
> > +#include <drm/drm_panel.h>
> > +
> > +#include <drmP.h>
> > +#include <drm_crtc_helper.h>
> > +#include <drm_crtc.h>
> > +#include <drm_atomic_helper.h>
> > +
> > +#define PAGE2_SPI_CFG3 0x82
> > +#define I2C_TO_SPI_RESET 0x20
> > +#define PAGE2_ROMADD_BYTE1 0x8e
> > +#define PAGE2_ROMADD_BYTE2 0x8f
> > +#define PAGE2_SWSPI_WDATA 0x90
> > +#define PAGE2_SWSPI_RDATA 0x91
> > +#define PAGE2_SWSPI_LEN 0x92
> > +#define PAGE2_SWSPI_CTL 0x93
> > +#define TRIGGER_NO_READBACK 0x05
> > +#define TRIGGER_READBACK 0x01
> > +#define PAGE2_SPI_STATUS 0x9e
> > +#define PAGE2_GPIO_L 0xa6
> > +#define PAGE2_GPIO_H 0xa7
> > +#define PS_GPIO9 BIT(1)
> > +#define PAGE2_IROM_CTRL 0xb0
> > +#define IROM_ENABLE 0xc0
> > +#define IROM_DISABLE 0x80
> > +#define PAGE2_SW_REST 0xbc
> > +#define PAGE2_ENCTLSPI_WR 0xda
> > +#define PAGE2_I2C_BYPASS 0xea
> > +#define I2C_BYPASS_EN 0xd0
> > +
> > +#define PAGE3_SET_ADD 0xfe
> > +#define PAGE3_SET_VAL 0xff
> > +#define VDO_CTL_ADD 0x13
> > +#define VDO_DIS 0x18
> > +#define VDO_EN 0x1c
> > +
> > +#define PAGE4_REV_L 0xf0
> > +#define PAGE4_REV_H 0xf1
> > +#define PAGE4_CHIP_L 0xf2
> > +#define PAGE4_CHIP_H 0xf3
> > +
> > +/* Firmware */
> > +#define SPI_MAX_RETRY_CNT 8
> > +#define PS_FW_NAME "ps864x_fw.bin"
> > +
> > +#define FW_CHIP_ID_OFFSET 0
> > +#define FW_VERSION_OFFSET 2
> > +
> > +#define bridge_to_ps8640(e) container_of(e, struct ps8640, bridge)
> > +#define connector_to_ps8640(e) container_of(e, struct ps8640, connector)
> > +
> > +struct ps8640_info {
> > + u8 family_id;
> > + u8 variant_id;
> > + u16 version;
> > +};
> > +
> > +struct ps8640 {
> > + struct drm_connector connector;
> > + struct drm_bridge bridge;
> > + struct i2c_client *page[8];
> > + struct ps8640_driver_data *driver_data;
> > + struct regulator *pwr_1v2_supply;
> > + struct regulator *pwr_3v3_supply;
> > + struct drm_panel *panel;
> > + struct gpio_desc *gpio_rst_n;
> > + struct gpio_desc *gpio_slp_n;
> > + struct gpio_desc *gpio_mode_sel_n;
> > + bool enabled;
> > +
> > + /* firmware file name */
> > + bool in_fw_update;
> > + char *fw_file;
> > + struct ps8640_info info;
> > +};
> > +
> > +static const u8 enc_ctrl_code[6] = {0xaa, 0x55, 0x50, 0x41, 0x52, 0x44};
> > +
> > +static int ps8640_regr(struct i2c_client *client, u8 reg, u8 *data,
> > + u16 data_len)
> > +{
> > + int ret;
> > +
> > + struct i2c_msg msgs[] = {
> > + {
> > + .addr = client->addr,
> > + .flags = 0,
> > + .len = 1,
> > + .buf = ®,
> > + },
> > + {
> > + .addr = client->addr,
> > + .flags = I2C_M_RD,
> > + .len = data_len,
> > + .buf = data,
> > + }
> > + };
> > +
> > + ret = i2c_transfer(client->adapter, msgs, 2);
> > +
> > + if (ret == 2)
> > + return 0;
> > + if (ret < 0)
> > + return ret;
> > + else
> > + return -EIO;
> > +}
> > +
> > +static int ps8640_regw(struct i2c_client *client, u8 reg, const u8 *data,
> > + u16 data_len)
> > +{
> > + int ret, i;
> > + struct i2c_msg msg;
> > + u8 *buf;
> > +
> > + buf = devm_kzalloc(&client->dev, data_len + 1, GFP_KERNEL);
> > + /* i2c page size is 256 bytes, so limit the data_len 256 */
> > + if (data_len > 256) {
> > + dev_err(&client->dev, "data_len must under 256: len = %d\n",
> > + data_len);
> > + return -EIO;
> > + }
> > + for (i = 0; i < data_len + 1; i++)
> > + buf[i] = (i == 0) ? reg : data[i - 1];
> > +
> > + msg.addr = client->addr;
> > + msg.flags = 0;
> > + msg.len = data_len + 1;
> > + msg.buf = buf;
> > +
> > + ret = i2c_transfer(client->adapter, &msg, 1);
> > + if (ret == 1)
> > + return 0;
> > + if (ret < 0)
> > + return ret;
> > + else
> > + return -EIO;
> > +}
> > +
> > +static int ps8640_regw_byte(struct i2c_client *client, u8 reg, u8 data)
> > +{
> > + int ret;
> > + struct i2c_msg msg;
> > + u8 buf[] = {reg, data};
> > +
> > + msg.addr = client->addr;
> > + msg.flags = 0;
> > + msg.len = sizeof(buf);
> > + msg.buf = buf;
> > +
> > + ret = i2c_transfer(client->adapter, &msg, 1);
> > + if (ret == 1)
> > + return 0;
> > + if (ret < 0)
> > + return ret;
> > + else
> > + return -EIO;
> > +}
> > +
> > +static int ps8640_check_valid_id(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[4];
> > + u8 chip_id[4];
> > +
> > + ps8640_regr(client, PAGE4_REV_L, chip_id, 4);
> > +
> > + if ((chip_id[0] == 0x00) && (chip_id[1] == 0x0a) &&
> > + (chip_id[2] == 0x00) && (chip_id[3] == 0x30))
> > + return 0;
> > +
> > + return -ENODEV;
> > +}
> > +
> > +static void ps8640_show_mcu_fw_version(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[5];
> > + u8 fw_ver[2];
> > +
> > + ps8640_regr(client, 0x4, fw_ver, 2);
> > + ps_bridge->info.version = (fw_ver[0] << 8) | fw_ver[1];
> > +
> > + DRM_INFO_ONCE("ps8640 rom fw version %d.%d\n", fw_ver[0], fw_ver[1]);
> > +}
> > +
> > +static int ps8640_bdg_enable(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[3];
> > + int ret;
> > + u8 vdo_ctrl[2] = {VDO_CTL_ADD, VDO_EN};
> > +
> > + ret = ps8640_check_valid_id(ps_bridge);
> > + if (ret) {
> > + DRM_ERROR("ps8640 not valid: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = ps8640_regw(client, PAGE3_SET_ADD, vdo_ctrl, 2);
> > + return ret;
> > +}
> > +
> > +static bool ps8640_in_bootloader(struct ps8640 *ps_bridge)
> > +{
> > + return ps_bridge->in_fw_update;
> > +}
> > +
> > +static void ps8640_prepare(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[2];
> > + int err, retry_cnt = 0;
> > + u8 set_vdo_done;
> > +
> > + if (ps8640_in_bootloader(ps_bridge))
> > + return;
> > +
> > + if (ps_bridge->enabled)
> > + return;
> > +
> > + err = drm_panel_prepare(ps_bridge->panel);
> > + if (err < 0) {
> > + DRM_ERROR("failed to prepare panel: %d\n", err);
> > + return;
> > + }
> > +
> > + /* delay for power stable */
> > + usleep_range(500, 700);
> > +
> > + err = regulator_enable(ps_bridge->pwr_1v2_supply);
> > + if (err < 0) {
> > + DRM_ERROR("failed to enable vdd12-supply: %d\n", err);
> > + goto err_panel_unprepare;
> > + }
> > +
> > + err = regulator_enable(ps_bridge->pwr_3v3_supply);
> > + if (err < 0) {
> > + DRM_ERROR("failed to enable vdd33-supply: %d\n", err);
> > + goto err_regulator_1v2_disable;
> > + }
> > +
> > + gpiod_set_value(ps_bridge->gpio_slp_n, 1);
> > + gpiod_set_value(ps_bridge->gpio_rst_n, 0);
> > + usleep_range(500, 700);
> > + gpiod_set_value(ps_bridge->gpio_rst_n, 1);
> > +
> > + /* wait for the ps8640 embed mcu ready
> > + * first wait 200ms and then check the mcu ready flag every 20ms
> > + */
> > + msleep(200);
> > + do {
> > + err = ps8640_regr(client, PAGE2_GPIO_H, &set_vdo_done, 1);
> > + if (err < 0) {
> > + DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", err);
> > + goto err_regulator_1v2_disable;
> > + }
> > + msleep(20);
> > + } while ((retry_cnt++ < 10) && ((set_vdo_done & PS_GPIO9) != PS_GPIO9));
> > +
> > + ps8640_show_mcu_fw_version(ps_bridge);
> > + ps8640_regw_byte(client, PAGE2_I2C_BYPASS, I2C_BYPASS_EN);
> > + ps_bridge->enabled = true;
> > +
> > + return;
> > +
> > +err_regulator_1v2_disable:
> > + regulator_disable(ps_bridge->pwr_1v2_supply);
> > +err_panel_unprepare:
> > + drm_panel_unprepare(ps_bridge->panel);
> > +}
> > +
> > +static void ps8640_pre_enable(struct drm_bridge *bridge)
> > +{
> > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> > +
> > + ps8640_prepare(ps_bridge);
> > +}
> > +
> > +static void ps8640_enable(struct drm_bridge *bridge)
> > +{
> > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> > + int err;
> > +
> > + err = ps8640_bdg_enable(ps_bridge);
> > + if (err)
> > + DRM_ERROR("failed to enable unmutevideo: %d\n", err);
> > +
> > + err = drm_panel_enable(ps_bridge->panel);
> > + if (err < 0)
> > + DRM_ERROR("failed to enable panel: %d\n", err);
> > +}
> > +
> > +static void ps8640_disable(struct drm_bridge *bridge)
> > +{
> > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> > + int err;
> > +
> > + if (ps8640_in_bootloader(ps_bridge))
> > + return;
> > +
> > + if (!ps_bridge->enabled)
> > + return;
> > +
> > + ps_bridge->enabled = false;
> > +
> > + err = drm_panel_disable(ps_bridge->panel);
> > + if (err < 0)
> > + DRM_ERROR("failed to disable panel: %d\n", err);
> > +
> > + gpiod_set_value(ps_bridge->gpio_rst_n, 0);
> > + gpiod_set_value(ps_bridge->gpio_slp_n, 0);
> > + regulator_disable(ps_bridge->pwr_3v3_supply);
> > + regulator_disable(ps_bridge->pwr_1v2_supply);
> > +}
> > +
> > +static void ps8640_post_disable(struct drm_bridge *bridge)
> > +{
> > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> > + int err;
> > +
> > + err = drm_panel_unprepare(ps_bridge->panel);
> > + if (err)
> > + DRM_ERROR("failed to unprepare panel: %d\n", err);
> > +}
> > +
> > +static int ps8640_get_modes(struct drm_connector *connector)
> > +{
> > + struct ps8640 *ps_bridge = connector_to_ps8640(connector);
> > +
> > + ps8640_prepare(ps_bridge);
> > +
> > + return drm_panel_get_modes(ps_bridge->panel);
> > +}
> > +
> > +static struct drm_encoder *ps8640_best_encoder(struct drm_connector *connector)
> > +{
> > + struct ps8640 *ps_bridge;
> > +
> > + ps_bridge = connector_to_ps8640(connector);
> > + return ps_bridge->bridge.encoder;
> > +}
> > +
> > +static const struct drm_connector_helper_funcs ps8640_connector_helper_funcs = {
> > + .get_modes = ps8640_get_modes,
> > + .best_encoder = ps8640_best_encoder,
> > +};
> > +
> > +static enum drm_connector_status ps8640_detect(struct drm_connector *connector,
> > + bool force)
> > +{
> > + return connector_status_connected;
> > +}
> > +
> > +static void ps8640_connector_destroy(struct drm_connector *connector)
> > +{
> > + drm_connector_unregister(connector);
> > + drm_connector_cleanup(connector);
> > +}
> > +
> > +static const struct drm_connector_funcs ps8640_connector_funcs = {
> > + .dpms = drm_atomic_helper_connector_dpms,
> > + .fill_modes = drm_helper_probe_single_connector_modes,
> > + .detect = ps8640_detect,
> > + .destroy = ps8640_connector_destroy,
> > + .reset = drm_atomic_helper_connector_reset,
> > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> > +};
> > +
> > +int ps8640_bridge_attach(struct drm_bridge *bridge)
> > +{
> > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> > + int ret;
> > +
> > + if (!bridge->encoder) {
> > + DRM_ERROR("Parent encoder object not found");
> > + return -ENODEV;
> > + }
> > +
> > + ret = drm_connector_init(bridge->dev, &ps_bridge->connector,
> > + &ps8640_connector_funcs,
> > + DRM_MODE_CONNECTOR_eDP);
> > +
> > + if (ret) {
> > + DRM_ERROR("Failed to initialize connector with drm: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + drm_connector_helper_add(&ps_bridge->connector,
> > + &ps8640_connector_helper_funcs);
> > + drm_connector_register(&ps_bridge->connector);
> > +
> > + ps_bridge->connector.dpms = DRM_MODE_DPMS_ON;
> > + drm_mode_connector_attach_encoder(&ps_bridge->connector,
> > + bridge->encoder);
> > +
> > + if (ps_bridge->panel)
> > + drm_panel_attach(ps_bridge->panel, &ps_bridge->connector);
> > +
> > + return ret;
> > +}
> > +
> > +static bool ps8640_bridge_mode_fixup(struct drm_bridge *bridge,
> > + const struct drm_display_mode *mode,
> > + struct drm_display_mode *adjusted_mode)
> > +{
> > + return true;
> > +}
> > +
> > +static const struct drm_bridge_funcs ps8640_bridge_funcs = {
> > + .attach = ps8640_bridge_attach,
> > + .mode_fixup = ps8640_bridge_mode_fixup,
> > + .disable = ps8640_disable,
> > + .post_disable = ps8640_post_disable,
> > + .pre_enable = ps8640_pre_enable,
> > + .enable = ps8640_enable,
> > +};
> > +
> > +static ssize_t ps8640_fw_file_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%s\n", ps_bridge->fw_file);
> > +}
> > +
> > +static int ps8640_update_file_name(struct device *dev, char **file_name,
> > + const char *buf, size_t count)
> > +{
> > + char *new_file_name;
> > +
> > + /* Simple sanity check */
> > + if (count > 64) {
> > + dev_warn(dev, "File name too long\n");
> > + return -EINVAL;
> > + }
> > +
> > + new_file_name = devm_kmalloc(dev, count + 1, GFP_KERNEL);
> > + if (!new_file_name)
> > + return -ENOMEM;
> > +
> > + memcpy(new_file_name, buf, count + 1);
> > +
> > + /* Echo into the sysfs entry may append newline at the end of buf */
> > + if (new_file_name[count - 1] == '\n')
> > + count--;
> > +
> > + new_file_name[count] = '\0';
> > +
> > + if (*file_name)
> > + devm_kfree(dev, *file_name);
> > +
> > + *file_name = new_file_name;
> > +
> > + return 0;
> > +}
> > +
> > +static ssize_t ps8640_fw_file_store(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + ret = ps8640_update_file_name(dev, &ps_bridge->fw_file, buf, count);
> > + if (ret)
> > + return ret;
> > +
> > + return count;
> > +}
> > +
> > +/* Firmware Version is returned as Major.Minor.Build */
> > +static ssize_t ps8640_fw_version_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> > + struct ps8640_info *info = &ps_bridge->info;
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%u.%u\n", info->version >> 8,
> > + info->version & 0xff);
> > +}
> > +
> > +/* Hardware Version is returned as FamilyID.VariantID */
> > +static ssize_t ps8640_hw_version_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> > + struct ps8640_info *info = &ps_bridge->info;
> > +
> > + return scnprintf(buf, PAGE_SIZE, "ps%u.%u\n", info->family_id,
> > + info->variant_id);
> > +}
> > +
> > +static int ps8640_spi_send_cmd(struct ps8640 *ps_bridge, u8 *cmd, u8 cmd_len)
> > +{
> > + struct i2c_client *client = ps_bridge->page[2];
> > + u8 i;
> > + int ret;
> > +
> > + ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE);
> > + if (ret)
> > + goto err;
> > +
> > + /* write command in write port */
> > + for (i = 0; i < cmd_len; i++) {
> > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_WDATA, cmd[i]);
> > + if (ret)
> > + goto err;
> > + }
> > + /* command length */
> > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_LEN, cmd_len - 1);
> > + if (ret)
> > + goto err;
> > + /* trigger read */
> > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_CTL, TRIGGER_NO_READBACK);
> > + if (ret)
> > + goto err;
> > +
> > + ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE);
> > + if (ret)
> > + goto err;
> > +
> > + return 0;
> > +
> > +err:
> > + dev_err(&client->dev, "send command err: %d\n", ret);
> > + return ret;
> > +}
> > +
> > +static int ps8640_wait_spi_ready(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[2];
> > + u8 spi_rdy_st, retry_cnt = 0;
> > +
> > + do {
> > + ps8640_regr(client, PAGE2_SPI_STATUS, &spi_rdy_st, 1);
> > + msleep(20);
> > + if ((retry_cnt == SPI_MAX_RETRY_CNT) &&
> > + ((spi_rdy_st & 0x0c) != 0x0c)) {
> > + dev_err(&client->dev, "wait spi ready timeout\n");
> > + return -EBUSY;
> > + }
> > + } while ((retry_cnt++ < SPI_MAX_RETRY_CNT) &&
> > + (spi_rdy_st & 0x0c) == 0x0c);
> > +
> > + return 0;
> > +}
> > +
> > +static int ps8640_wait_spi_nobusy(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[2];
> > + u8 spi_status, retry_cnt = 0;
> > + int ret;
> > +
> > + do {
> > + /* 0x05 RDSR; Read-Status-Register */
> > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_WDATA, 0x05);
> > + if (ret)
> > + goto err_send_cmd_exit;
> > +
> > + /* command length */
> > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_LEN, 0x00);
> > + if (ret)
> > + goto err_send_cmd_exit;
> > +
> > + /* trigger read */
> > + ret = ps8640_regw_byte(client, PAGE2_SWSPI_CTL,
> > + TRIGGER_READBACK);
> > + if (ret)
> > + goto err_send_cmd_exit;
> > +
> > + /* delay for cmd send */
> > + usleep_range(100, 300);
> > + /* wait for SPI ROM until not busy */
> > + ret = ps8640_regr(client, PAGE2_SWSPI_RDATA, &spi_status, 1);
> > + if (ret)
> > + goto err_send_cmd_exit;
> > + } while ((retry_cnt++ < SPI_MAX_RETRY_CNT) &&
> > + (spi_status & 0x0c) == 0x0c);
> > +
> > + if ((retry_cnt > SPI_MAX_RETRY_CNT) && (spi_status & 0x0c) != 0x0c) {
> > + ret = -EBUSY;
> > + dev_err(&client->dev, "wait spi no busy timeout: %d\n", ret);
> > + goto err_timeout;
> > + }
> > +
> > + return 0;
> > +
> > +err_send_cmd_exit:
> > + dev_err(&client->dev, "send command err: %d\n", ret);
> > +
> > +err_timeout:
> > + return ret;
> > +}
> > +
> > +static int ps8640_wait_rom_idle(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[0];
> > + int ret;
> > +
> > + ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = ps8640_wait_spi_ready(ps_bridge);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = ps8640_wait_spi_nobusy(ps_bridge);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE);
> > + if (ret)
> > + goto exit;
> > +
> > +exit:
> > + if (ret)
> > + dev_err(&client->dev, "wait ps8640 rom idle fail: %d\n", ret);
> > +
> > + return ret;
> > +}
> > +
> > +static int ps8640_spi_dl_mode(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[2];
> > + int ret;
> > +
> > + /* switch ps8640 mode to spi dl mode */
> > + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 0);
> > +
> > + /* reset spi interface */
> > + ret = ps8640_regw_byte(client, PAGE2_SW_REST, 0xc0);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = ps8640_regw_byte(client, PAGE2_SW_REST, 0x40);
> > + if (ret)
> > + goto exit;
> > +
> > +exit:
> > + if (ret)
> > + dev_err(&client->dev, "fail reset spi interface: %d\n", ret);
> > +
> > + return ret;
> > +}
> > +
> > +static int ps8640_rom_prepare(struct ps8640 *ps_bridge)
> > +{
> > + struct i2c_client *client = ps_bridge->page[2];
> > + struct device *dev = &client->dev;
> > + u8 i, cmd[2];
> > + int ret;
> > +
> > + /* Enable-Write-Status-Register */
> > + cmd[0] = 0x06;
> > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> > + if (ret) {
> > + dev_err(dev, "failed enable-write-status-register: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* disable all protection */
> > + cmd[0] = 0x01;
> > + cmd[1] = 0x00;
> > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 2);
> > + if (ret) {
> > + dev_err(dev, "fail disable all protection: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* wait for SPI module ready */
> > + ret = ps8640_wait_rom_idle(ps_bridge);
> > + if (ret) {
> > + dev_err(dev, "fail wait rom idle: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE);
> > + for (i = 0; i < 6; i++)
> > + ps8640_regw_byte(client, PAGE2_ENCTLSPI_WR, enc_ctrl_code[i]);
> > + ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE);
> > +
> > + /* Enable-Write-Status-Register */
> > + cmd[0] = 0x06;
> > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> > + if (ret) {
> > + dev_err(dev, "fail enable-write-status-register: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* chip erase command */
> > + cmd[0] = 0xc7;
> > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> > + if (ret) {
> > + dev_err(dev, "fail disable all protection: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = ps8640_wait_rom_idle(ps_bridge);
> > + if (ret) {
> > + dev_err(dev, "fail wait rom idle: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int ps8640_validate_firmware(struct ps8640 *ps_bridge,
> > + const struct firmware *fw)
> > +{
> > + struct i2c_client *client = ps_bridge->page[0];
> > + struct ps8640_info *info = &ps_bridge->info;
> > + u16 fw_chip_id, fw_version_id;
> > +
> > + /*
> > + * Get the chip_id from the firmware. Make sure that it is the
> > + * right controller to do the firmware and config update.
> > + */
> > + fw_chip_id = get_unaligned_le16(fw->data + FW_CHIP_ID_OFFSET);
> > +
> > + if (fw_chip_id != 0x8640) {
> > + dev_err(&client->dev,
> > + "chip id mismatch: fw 0x%x vs. chip 0x8640\n",
> > + fw_chip_id);
> > + return -ENODEV;
> > + }
> > +
> > + fw_version_id = get_unaligned_le16(fw->data + FW_VERSION_OFFSET);
> > +
> > + if (fw_chip_id != info->version) {
> > + dev_err(&client->dev,
> > + "fw version mismatch: fw %d.%d vs. chip %d.%d\n",
> > + fw_version_id >> 8, fw_version_id & 0xff,
> > + info->version >> 8, info->version & 0xff);
> > + return -ENODEV;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int ps8640_write_rom(struct ps8640 *ps_bridge, const struct firmware *fw)
> > +{
> > + struct i2c_client *client = ps_bridge->page[0];
> > + struct device *dev = &client->dev;
> > + struct i2c_client *client2 = ps_bridge->page[2];
> > + struct i2c_client *client7 = ps_bridge->page[7];
> > + unsigned int pos = 0;
> > + u8 progress_cnt, rom_page_id[2];
> > + int ret;
> > +
> > + ps8640_regw_byte(client2, PAGE2_SPI_CFG3, I2C_TO_SPI_RESET);
> > + msleep(100);
> > + ps8640_regw_byte(client2, PAGE2_SPI_CFG3, 0x00);
> > +
> > + while (pos < fw->size) {
> > + rom_page_id[0] = (pos >> 8) & 0xFF;
> > + rom_page_id[1] = (pos >> 16) & 0xFF;
> > + ret = ps8640_regw(client2, PAGE2_ROMADD_BYTE1, rom_page_id, 2);
> > + if (ret)
> > + goto error;
> > + ret = ps8640_regw(client7, 0, fw->data + pos, 256);
> > + if (ret)
> > + goto error;
> > +
> > + pos += 256;
> > + if (progress_cnt != (pos * 100) / fw->size) {
> > + progress_cnt = (pos * 100) / fw->size;
> > + dev_info(dev, "fw update progress percent %d\n",
> > + progress_cnt);
> > + }
> > + }
> > + return 0;
> > +
> > +error:
> > + dev_err(dev, "failed write extenal flash, %d\n", ret);
> > + return ret;
> > +}
> > +
> > +static int ps8640_spi_normal_mode(struct ps8640 *ps_bridge)
> > +{
> > + u8 cmd[2];
> > + struct i2c_client *client = ps_bridge->page[2];
> > +
> > + /* Enable-Write-Status-Register */
> > + cmd[0] = 0x06;
> > + ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> > +
> > + /* protect BPL/BP0/BP1 */
> > + cmd[0] = 0x01;
> > + cmd[1] = 0x8c;
> > + ps8640_spi_send_cmd(ps_bridge, cmd, 2);
> > +
> > + /* wait for SPI rom ready */
> > + ps8640_wait_rom_idle(ps_bridge);
> > +
> > + /* disable PS8640 mapping function */
> > + ps8640_regw_byte(client, PAGE2_ENCTLSPI_WR, 0x00);
> > +
> > + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 1);
> > + return 0;
> > +}
> > +
> > +static int ps8640_enter_bl(struct ps8640 *ps_bridge)
> > +{
> > + int ret;
> > +
> > + ret = ps8640_spi_dl_mode(ps_bridge);
> > + if (ret)
> > + return ret;
> > +
> > + ps_bridge->in_fw_update = true;
> > + return 0;
> > +}
> > +
> > +static void ps8640_exit_bl(struct ps8640 *ps_bridge, const struct firmware *fw)
> > +{
> > + ps_bridge->in_fw_update = false;
> > + ps8640_spi_normal_mode(ps_bridge);
> > +}
> > +
> > +static int ps8640_load_fw(struct ps8640 *ps_bridge, const struct firmware *fw)
> > +{
> > + struct i2c_client *client = ps_bridge->page[0];
> > + struct device *dev = &client->dev;
> > + int ret;
> > + bool ps8640_status_backup = ps_bridge->enabled;
> > +
> > + if (!ps8640_in_bootloader(ps_bridge)) {
> > + if (!ps8640_status_backup)
> > + ps8640_prepare(ps_bridge);
> > +
> > + ret = ps8640_enter_bl(ps_bridge);
> > + if (ret)
> > + goto exit;
> > + }
> > +
> > + ret = ps8640_validate_firmware(ps_bridge, fw);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = ps8640_rom_prepare(ps_bridge);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = ps8640_write_rom(ps_bridge, fw);
> > +
> > +exit:
> > + if (ret)
> > + dev_err(dev, "Failed to load firmware, %d\n", ret);
> > +
> > + ps8640_exit_bl(ps_bridge, fw);
> > + if (!ps8640_status_backup)
> > + ps8640_disable(&ps_bridge->bridge);
> > + return ret;
> > +}
> > +
> > +static ssize_t ps8640_update_fw_store(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct ps8640 *ps_bridge = i2c_get_clientdata(client);
> > + const struct firmware *fw;
> > + int error;
> > +
> > + error = request_firmware(&fw, ps_bridge->fw_file, dev);
> > + if (error) {
> > + dev_err(dev, "Unable to open firmware %s: %d\n",
> > + ps_bridge->fw_file, error);
> > + return error;
> > + }
> > +
> > + error = ps8640_load_fw(ps_bridge, fw);
> > + if (error)
> > + dev_err(dev, "The firmware update failed(%d)\n", error);
> > + else
> > + dev_info(dev, "The firmware update succeeded\n");
> > +
> > + release_firmware(fw);
> > + return error ? error : count;
> > +}
> > +
> > +static DEVICE_ATTR(fw_file, S_IRUGO | S_IWUSR, ps8640_fw_file_show,
> > + ps8640_fw_file_store);
> > +static DEVICE_ATTR(fw_version, S_IRUGO, ps8640_fw_version_show, NULL);
> > +static DEVICE_ATTR(hw_version, S_IRUGO, ps8640_hw_version_show, NULL);
> > +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, ps8640_update_fw_store);
> > +
> > +static struct attribute *ps8640_attrs[] = {
> > + &dev_attr_fw_file.attr,
> > + &dev_attr_fw_version.attr,
> > + &dev_attr_hw_version.attr,
> > + &dev_attr_update_fw.attr,
> > + NULL
> > +};
> > +
> > +static const struct attribute_group ps8640_attr_group = {
> > + .attrs = ps8640_attrs,
> > +};
> > +
> > +static void ps8640_remove_sysfs_group(void *data)
> > +{
> > + struct ps8640 *ps_bridge = data;
> > +
> > + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group);
> > +}
> > +
> > +/* for fireware update end */
> > +
> > +static int ps8640_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + struct device *dev = &client->dev;
> > + struct ps8640 *ps_bridge;
> > + struct device_node *np = dev->of_node;
> > + struct device_node *port, *out_ep;
> > + struct device_node *panel_node = NULL;
> > + int i, ret;
> > +
> > + ps_bridge = devm_kzalloc(dev, sizeof(*ps_bridge), GFP_KERNEL);
> > + if (!ps_bridge) {
> > + ret = -ENOMEM;
> > + goto exit;
> > + }
> > + /* port at 1 is ps8640 output port */
> > + port = of_graph_get_port_by_id(np, 1);
> > + if (port) {
> > + out_ep = of_get_child_by_name(port, "endpoint");
> > + of_node_put(port);
> > + if (out_ep) {
> > + panel_node = of_graph_get_remote_port_parent(out_ep);
> > + of_node_put(out_ep);
> > + }
> > + }
> > + if (panel_node) {
> > + ps_bridge->panel = of_drm_find_panel(panel_node);
> > + of_node_put(panel_node);
> > + if (!ps_bridge->panel) {
> > + ret = -EPROBE_DEFER;
> > + goto exit;
> > + }
> > + }
> > +
> > + ps_bridge->pwr_3v3_supply = devm_regulator_get(dev, "vdd33");
> > + if (IS_ERR(ps_bridge->pwr_3v3_supply)) {
> > + ret = PTR_ERR(ps_bridge->pwr_3v3_supply);
> > + dev_err(dev, "cannot get vdd33 supply: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ps_bridge->pwr_1v2_supply = devm_regulator_get(dev, "vdd12");
> > + if (IS_ERR(ps_bridge->pwr_1v2_supply)) {
> > + ret = PTR_ERR(ps_bridge->pwr_1v2_supply);
> > + dev_err(dev, "cannot get vdd12 supply: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ps_bridge->gpio_mode_sel_n = devm_gpiod_get(&client->dev, "mode-sel",
> > + GPIOD_OUT_HIGH);
> > + if (IS_ERR(ps_bridge->gpio_mode_sel_n)) {
> > + ret = PTR_ERR(ps_bridge->gpio_mode_sel_n);
> > + dev_err(dev, "cannot get gpio_mode_sel_n %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ps_bridge->gpio_slp_n = devm_gpiod_get(&client->dev, "sleep",
> > + GPIOD_OUT_HIGH);
> > + if (IS_ERR(ps_bridge->gpio_slp_n)) {
> > + ret = PTR_ERR(ps_bridge->gpio_slp_n);
> > + dev_err(dev, "cannot get gpio_slp_n: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ps_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset",
> > + GPIOD_OUT_HIGH);
> > + if (IS_ERR(ps_bridge->gpio_rst_n)) {
> > + ret = PTR_ERR(ps_bridge->gpio_rst_n);
> > + dev_err(dev, "cannot get gpio_rst_n: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ps_bridge->bridge.funcs = &ps8640_bridge_funcs;
> > + ps_bridge->bridge.of_node = dev->of_node;
> > + ret = drm_bridge_add(&ps_bridge->bridge);
> > + if (ret) {
> > + dev_err(dev, "Failed to add bridge: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ret = ps8640_update_file_name(&client->dev, &ps_bridge->fw_file,
> > + PS_FW_NAME, strlen(PS_FW_NAME));
> > + if (ret) {
> > + dev_err(dev, "failed to update file name: %d\n", ret);
> > + goto exit;
> > + }
> > +
> > + ps_bridge->page[0] = client;
> > +
> > + /* ps8640 uses multiple addresses, use dummy devices for them
> > + * page[0]: for DP control
> > + * page[1]: for VIDEO Bridge
> > + * page[2]: for control top
> > + * page[3]: for DSI Link Control1
> > + * page[4]: for MIPI Phy
> > + * page[5]: for VPLL
> > + * page[6]: for DSI Link Control2
> > + * page[7]: for spi rom mapping
> > + */
> > + for (i = 1; i < 8; i++) {
> > + ps_bridge->page[i] = i2c_new_dummy(client->adapter,
> > + client->addr + i);
> > + if (!ps_bridge->page[i]) {
> > + dev_err(dev, "failed i2c dummy device, address%02x\n",
> > + client->addr + i);
> > + ret = -EBUSY;
> > + goto exit_dummy;
> > + }
> > + }
> > + i2c_set_clientdata(client, ps_bridge);
> > +
> > + ret = sysfs_create_group(&client->dev.kobj, &ps8640_attr_group);
> > + if (ret) {
> > + dev_err(dev, "failed to create sysfs entries: %d\n", ret);
> > + goto exit_dummy;
> > + }
> > +
> > + ret = devm_add_action(dev, ps8640_remove_sysfs_group, ps_bridge);
> > + if (ret) {
> > + ps8640_remove_sysfs_group(ps_bridge);
> > + dev_err(dev, "failed to add sysfs cleanup action: %d\n", ret);
> > + goto exit_dummy;
> > + }
> > + return 0;
> > +
> > +exit_dummy:
> > + for (i = 1; i < 8; i++)
> > + if (ps_bridge->page[i])
> > + i2c_unregister_device(ps_bridge->page[i]);
> > +
> > +exit:
> > + return ret;
> > +}
> > +
> > +static int ps8640_remove(struct i2c_client *client)
> > +{
> > + struct ps8640 *ps_bridge = i2c_get_clientdata(client);
> > + int i;
> > +
> > + for (i = 1; i < 8; i++)
> > + if (ps_bridge->page[i])
> > + i2c_unregister_device(ps_bridge->page[i]);
> > +
> > + drm_bridge_remove(&ps_bridge->bridge);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id ps8640_i2c_table[] = {
> > + {"parade,ps8640", 0},
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(i2c, ps8640_i2c_table);
> > +
> > +static const struct of_device_id ps8640_match[] = {
> > + { .compatible = "parade,ps8640" },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, ps8640_match);
> > +
> > +static struct i2c_driver ps8640_driver = {
> > + .id_table = ps8640_i2c_table,
> > + .probe = ps8640_probe,
> > + .remove = ps8640_remove,
> > + .driver = {
> > + .name = "parade,ps8640",
> > + .of_match_table = ps8640_match,
> > + },
> > +};
> > +module_i2c_driver(ps8640_driver);
> > +
> > +MODULE_AUTHOR("Jitao Shi <jitao.shi at mediatek.com>");
> > +MODULE_AUTHOR("CK Hu <ck.hu at mediatek.com>");
> > +MODULE_DESCRIPTION("PARADE ps8640 DSI-eDP converter driver");
> > +MODULE_LICENSE("GPL v2");
> >
>
More information about the Linux-mediatek
mailing list