[PATCH v7 2/2] drm/bridge: Add I2C based driver for ps8640 bridge

Archit Taneja architt at codeaurora.org
Tue Jan 12 23:11:10 PST 2016


Hi Jitao,

On 01/13/2016 07:48 AM, Jitao Shi wrote:
> This patch adds drm_bridge driver for parade DSI to eDP bridge chip.
>
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> ---
> Changes since v6:
>   - Add ps8640 firmware update function
>   - Change i2c to i2c_transfer from i2c_master_recv/i2c_master_send
>   - Add comments for each page client

I'd commented on the v6 patch set here:

https://lkml.org/lkml/2015/12/15/62

I wanted to know how the bridge driver was transferring parameters
to the dsi host. Is that something that you are hardcoding on both
the dsi host and ps8640 drivers for now?

My intention of asking this is to know if there are other users
that can take advantage of this patch set:

https://lkml.org/lkml/2015/12/10/283

Thanks,
Archit

> ---
>   drivers/gpu/drm/bridge/Kconfig         |   10 +
>   drivers/gpu/drm/bridge/Makefile        |    1 +
>   drivers/gpu/drm/bridge/parade-ps8640.c | 1106 ++++++++++++++++++++++++++++++++
>   3 files changed, 1117 insertions(+)
>   create mode 100644 drivers/gpu/drm/bridge/parade-ps8640.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 6dddd39..dcfdbc9 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -41,4 +41,14 @@ config DRM_PARADE_PS8622
>   	---help---
>   	  Parade eDP-LVDS bridge chip driver.
>
> +config DRM_PARADE_PS8640
> +	tristate "Parade PS8640 MIPI DSI to eDP Converter"
> +	depends on OF
> +	select DRM_KMS_HELPER
> +	select DRM_PANEL
> +	---help---
> +	  Choose this option if you have PS8640 for display
> +	  The PS8640 is a high-performance and low-power
> +	  MIPI DSI to eDP converter
> +
>   endmenu
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index d4e28be..272e3c01 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
>   obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
>   obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
>   obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> +obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
> diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
> new file mode 100644
> index 0000000..a18d8e9
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/parade-ps8640.c
> @@ -0,0 +1,1106 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/firmware.h>
> +#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +#include <asm/unaligned.h>
> +#include <drm/drm_panel.h>
> +
> +#include <drmP.h>
> +#include <drm_crtc_helper.h>
> +#include <drm_crtc.h>
> +#include <drm_atomic_helper.h>
> +
> +#define PAGE2_SPI_CFG3		0x82
> +#define I2C_TO_SPI_RESET	0x20
> +#define PAGE2_ROMADD_BYTE1	0x8e
> +#define PAGE2_ROMADD_BYTE2	0x8f
> +#define PAGE2_SWSPI_WDATA	0x90
> +#define PAGE2_SWSPI_RDATA	0x91
> +#define PAGE2_SWSPI_LEN		0x92
> +#define PAGE2_SWSPI_CTL		0x93
> +#define TRIGGER_NO_READBACK	0x05
> +#define TRIGGER_READBACK	0x01
> +#define PAGE2_SPI_STATUS	0x9e
> +#define PAGE2_GPIO_L		0xa6
> +#define PAGE2_GPIO_H		0xa7
> +#define PS_GPIO9		BIT(1)
> +#define PAGE2_IROM_CTRL		0xb0
> +#define IROM_ENABLE		0xc0
> +#define IROM_DISABLE		0x80
> +#define PAGE2_SW_REST		0xbc
> +#define PAGE2_ENCTLSPI_WR	0xda
> +#define PAGE2_I2C_BYPASS	0xea
> +#define I2C_BYPASS_EN		0xd0
> +
> +#define PAGE3_SET_ADD		0xfe
> +#define PAGE3_SET_VAL		0xff
> +#define VDO_CTL_ADD		0x13
> +#define VDO_DIS			0x18
> +#define VDO_EN			0x1c
> +
> +#define PAGE4_REV_L		0xf0
> +#define PAGE4_REV_H		0xf1
> +#define PAGE4_CHIP_L		0xf2
> +#define PAGE4_CHIP_H		0xf3
> +
> +/* Firmware */
> +#define SPI_MAX_RETRY_CNT	8
> +#define PS_FW_NAME		"ps864x_fw.bin"
> +
> +#define FW_CHIP_ID_OFFSET		0
> +#define FW_VERSION_OFFSET		2
> +
> +#define bridge_to_ps8640(e)	container_of(e, struct ps8640, bridge)
> +#define connector_to_ps8640(e)	container_of(e, struct ps8640, connector)
> +
> +struct ps8640_info {
> +	u8 family_id;
> +	u8 variant_id;
> +	u16 version;
> +};
> +
> +struct ps8640 {
> +	struct drm_connector connector;
> +	struct drm_bridge bridge;
> +	struct i2c_client *page[8];
> +	struct ps8640_driver_data *driver_data;
> +	struct regulator *pwr_1v2_supply;
> +	struct regulator *pwr_3v3_supply;
> +	struct drm_panel *panel;
> +	struct gpio_desc *gpio_rst_n;
> +	struct gpio_desc *gpio_slp_n;
> +	struct gpio_desc *gpio_mode_sel_n;
> +	bool enabled;
> +
> +	/* firmware file name */
> +	bool in_fw_update;
> +	char *fw_file;
> +	struct ps8640_info info;
> +};
> +
> +static const u8 enc_ctrl_code[6] = {0xaa, 0x55, 0x50, 0x41, 0x52, 0x44};
> +
> +static int ps8640_regr(struct i2c_client *client, u8 reg, u8 *data,
> +		       u16 data_len)
> +{
> +	int ret;
> +
> +	struct i2c_msg msgs[] = {
> +		{
> +		 .addr = client->addr,
> +		 .flags = 0,
> +		 .len = 1,
> +		 .buf = &reg,
> +		 },
> +		{
> +		 .addr = client->addr,
> +		 .flags = I2C_M_RD,
> +		 .len = data_len,
> +		 .buf = data,
> +		 }
> +	};
> +
> +	ret = i2c_transfer(client->adapter, msgs, 2);
> +
> +	if (ret == 2)
> +		return 0;
> +	if (ret < 0)
> +		return ret;
> +	else
> +		return -EIO;
> +}
> +
> +static int ps8640_regw(struct i2c_client *client, u8 reg,  const u8 *data,
> +		       u16 data_len)
> +{
> +	int ret, i;
> +	struct i2c_msg msg;
> +	u8 *buf;
> +
> +	buf = devm_kzalloc(&client->dev, data_len + 1, GFP_KERNEL);
> +	/* i2c page size is 256 bytes, so limit the data_len 256 */
> +	if (data_len > 256) {
> +		dev_err(&client->dev, "data_len must under 256: len = %d\n",
> +			data_len);
> +		return -EIO;
> +	}
> +	for (i = 0; i < data_len + 1; i++)
> +		buf[i] = (i == 0) ? reg : data[i - 1];
> +
> +	msg.addr = client->addr;
> +	msg.flags = 0;
> +	msg.len = data_len + 1;
> +	msg.buf = buf;
> +
> +	ret = i2c_transfer(client->adapter, &msg, 1);
> +	if (ret == 1)
> +		return 0;
> +	if (ret < 0)
> +		return ret;
> +	else
> +		return -EIO;
> +}
> +
> +static int ps8640_regw_byte(struct i2c_client *client, u8 reg,  u8 data)
> +{
> +	int ret;
> +	struct i2c_msg msg;
> +	u8 buf[] = {reg, data};
> +
> +	msg.addr = client->addr;
> +	msg.flags = 0;
> +	msg.len = sizeof(buf);
> +	msg.buf = buf;
> +
> +	ret = i2c_transfer(client->adapter, &msg, 1);
> +	if (ret == 1)
> +		return 0;
> +	if (ret < 0)
> +		return ret;
> +	else
> +		return -EIO;
> +}
> +
> +static int ps8640_check_valid_id(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[4];
> +	u8 chip_id[4];
> +
> +	ps8640_regr(client, PAGE4_REV_L, chip_id, 4);
> +
> +	if ((chip_id[0] == 0x00) && (chip_id[1] == 0x0a) &&
> +	    (chip_id[2] == 0x00) && (chip_id[3] == 0x30))
> +		return 0;
> +
> +	return -ENODEV;
> +}
> +
> +static void ps8640_show_mcu_fw_version(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[5];
> +	u8 fw_ver[2];
> +
> +	ps8640_regr(client, 0x4, fw_ver, 2);
> +	ps_bridge->info.version = (fw_ver[0] << 8) | fw_ver[1];
> +
> +	DRM_INFO_ONCE("ps8640 rom fw version %d.%d\n", fw_ver[0], fw_ver[1]);
> +}
> +
> +static int ps8640_bdg_enable(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[3];
> +	int ret;
> +	u8 vdo_ctrl[2] = {VDO_CTL_ADD, VDO_EN};
> +
> +	ret = ps8640_check_valid_id(ps_bridge);
> +	if (ret) {
> +		DRM_ERROR("ps8640 not valid: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = ps8640_regw(client, PAGE3_SET_ADD, vdo_ctrl, 2);
> +	return ret;
> +}
> +
> +static bool ps8640_in_bootloader(struct ps8640 *ps_bridge)
> +{
> +	return ps_bridge->in_fw_update;
> +}
> +
> +static void ps8640_prepare(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[2];
> +	int err, retry_cnt = 0;
> +	u8 set_vdo_done;
> +
> +	if (ps8640_in_bootloader(ps_bridge))
> +		return;
> +
> +	if (ps_bridge->enabled)
> +		return;
> +
> +	err = drm_panel_prepare(ps_bridge->panel);
> +	if (err < 0) {
> +		DRM_ERROR("failed to prepare panel: %d\n", err);
> +		return;
> +	}
> +
> +	/* delay for power stable */
> +	usleep_range(500, 700);
> +
> +	err = regulator_enable(ps_bridge->pwr_1v2_supply);
> +	if (err < 0) {
> +		DRM_ERROR("failed to enable vdd12-supply: %d\n", err);
> +		goto err_panel_unprepare;
> +	}
> +
> +	err = regulator_enable(ps_bridge->pwr_3v3_supply);
> +	if (err < 0) {
> +		DRM_ERROR("failed to enable vdd33-supply: %d\n", err);
> +		goto err_regulator_1v2_disable;
> +	}
> +
> +	gpiod_set_value(ps_bridge->gpio_slp_n, 1);
> +	gpiod_set_value(ps_bridge->gpio_rst_n, 0);
> +	usleep_range(500, 700);
> +	gpiod_set_value(ps_bridge->gpio_rst_n, 1);
> +
> +	/* wait for the ps8640 embed mcu ready
> +	  * first wait 200ms and then check the mcu ready flag every 20ms
> +	*/
> +	msleep(200);
> +	do {
> +		err = ps8640_regr(client, PAGE2_GPIO_H, &set_vdo_done, 1);
> +		if (err < 0) {
> +			DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", err);
> +			goto err_regulator_1v2_disable;
> +		}
> +		msleep(20);
> +	} while ((retry_cnt++ < 10) && ((set_vdo_done & PS_GPIO9) != PS_GPIO9));
> +
> +	ps8640_show_mcu_fw_version(ps_bridge);
> +	ps8640_regw_byte(client, PAGE2_I2C_BYPASS, I2C_BYPASS_EN);
> +	ps_bridge->enabled = true;
> +
> +	return;
> +
> +err_regulator_1v2_disable:
> +	regulator_disable(ps_bridge->pwr_1v2_supply);
> +err_panel_unprepare:
> +	drm_panel_unprepare(ps_bridge->panel);
> +}
> +
> +static void ps8640_pre_enable(struct drm_bridge *bridge)
> +{
> +	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +
> +	ps8640_prepare(ps_bridge);
> +}
> +
> +static void ps8640_enable(struct drm_bridge *bridge)
> +{
> +	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +	int err;
> +
> +	err = ps8640_bdg_enable(ps_bridge);
> +	if (err)
> +		DRM_ERROR("failed to enable unmutevideo: %d\n", err);
> +
> +	err = drm_panel_enable(ps_bridge->panel);
> +	if (err < 0)
> +		DRM_ERROR("failed to enable panel: %d\n", err);
> +}
> +
> +static void ps8640_disable(struct drm_bridge *bridge)
> +{
> +	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +	int err;
> +
> +	if (ps8640_in_bootloader(ps_bridge))
> +		return;
> +
> +	if (!ps_bridge->enabled)
> +		return;
> +
> +	ps_bridge->enabled = false;
> +
> +	err = drm_panel_disable(ps_bridge->panel);
> +	if (err < 0)
> +		DRM_ERROR("failed to disable panel: %d\n", err);
> +
> +	gpiod_set_value(ps_bridge->gpio_rst_n, 0);
> +	gpiod_set_value(ps_bridge->gpio_slp_n, 0);
> +	regulator_disable(ps_bridge->pwr_3v3_supply);
> +	regulator_disable(ps_bridge->pwr_1v2_supply);
> +}
> +
> +static void ps8640_post_disable(struct drm_bridge *bridge)
> +{
> +	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +	int err;
> +
> +	err = drm_panel_unprepare(ps_bridge->panel);
> +	if (err)
> +		DRM_ERROR("failed to unprepare panel: %d\n", err);
> +}
> +
> +static int ps8640_get_modes(struct drm_connector *connector)
> +{
> +	struct ps8640 *ps_bridge = connector_to_ps8640(connector);
> +
> +	ps8640_prepare(ps_bridge);
> +
> +	return drm_panel_get_modes(ps_bridge->panel);
> +}
> +
> +static struct drm_encoder *ps8640_best_encoder(struct drm_connector *connector)
> +{
> +	struct ps8640 *ps_bridge;
> +
> +	ps_bridge = connector_to_ps8640(connector);
> +	return ps_bridge->bridge.encoder;
> +}
> +
> +static const struct drm_connector_helper_funcs ps8640_connector_helper_funcs = {
> +	.get_modes = ps8640_get_modes,
> +	.best_encoder = ps8640_best_encoder,
> +};
> +
> +static enum drm_connector_status ps8640_detect(struct drm_connector *connector,
> +					       bool force)
> +{
> +	return connector_status_connected;
> +}
> +
> +static void ps8640_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);
> +	drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs ps8640_connector_funcs = {
> +	.dpms = drm_atomic_helper_connector_dpms,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.detect = ps8640_detect,
> +	.destroy = ps8640_connector_destroy,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +int ps8640_bridge_attach(struct drm_bridge *bridge)
> +{
> +	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +	int ret;
> +
> +	if (!bridge->encoder) {
> +		DRM_ERROR("Parent encoder object not found");
> +		return -ENODEV;
> +	}
> +
> +	ret = drm_connector_init(bridge->dev, &ps_bridge->connector,
> +				 &ps8640_connector_funcs,
> +				 DRM_MODE_CONNECTOR_eDP);
> +
> +	if (ret) {
> +		DRM_ERROR("Failed to initialize connector with drm: %d\n", ret);
> +		return ret;
> +	}
> +
> +	drm_connector_helper_add(&ps_bridge->connector,
> +				 &ps8640_connector_helper_funcs);
> +	drm_connector_register(&ps_bridge->connector);
> +
> +	ps_bridge->connector.dpms = DRM_MODE_DPMS_ON;
> +	drm_mode_connector_attach_encoder(&ps_bridge->connector,
> +					  bridge->encoder);
> +
> +	if (ps_bridge->panel)
> +		drm_panel_attach(ps_bridge->panel, &ps_bridge->connector);
> +
> +	return ret;
> +}
> +
> +static bool ps8640_bridge_mode_fixup(struct drm_bridge *bridge,
> +				     const struct drm_display_mode *mode,
> +				     struct drm_display_mode *adjusted_mode)
> +{
> +	return true;
> +}
> +
> +static const struct drm_bridge_funcs ps8640_bridge_funcs = {
> +	.attach = ps8640_bridge_attach,
> +	.mode_fixup = ps8640_bridge_mode_fixup,
> +	.disable = ps8640_disable,
> +	.post_disable = ps8640_post_disable,
> +	.pre_enable = ps8640_pre_enable,
> +	.enable = ps8640_enable,
> +};
> +
> +static ssize_t ps8640_fw_file_show(struct device *dev,
> +				   struct device_attribute *attr, char *buf)
> +{
> +	struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> +
> +	return scnprintf(buf, PAGE_SIZE, "%s\n", ps_bridge->fw_file);
> +}
> +
> +static int ps8640_update_file_name(struct device *dev, char **file_name,
> +				   const char *buf, size_t count)
> +{
> +	char *new_file_name;
> +
> +	/* Simple sanity check */
> +	if (count > 64) {
> +		dev_warn(dev, "File name too long\n");
> +		return -EINVAL;
> +	}
> +
> +	new_file_name = devm_kmalloc(dev, count + 1, GFP_KERNEL);
> +	if (!new_file_name)
> +		return -ENOMEM;
> +
> +	memcpy(new_file_name, buf, count + 1);
> +
> +	/* Echo into the sysfs entry may append newline at the end of buf */
> +	if (new_file_name[count - 1] == '\n')
> +		count--;
> +
> +	new_file_name[count] = '\0';
> +
> +	if (*file_name)
> +		devm_kfree(dev, *file_name);
> +
> +	*file_name = new_file_name;
> +
> +	return 0;
> +}
> +
> +static ssize_t ps8640_fw_file_store(struct device *dev,
> +				    struct device_attribute *attr,
> +				    const char *buf, size_t count)
> +{
> +	struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = ps8640_update_file_name(dev, &ps_bridge->fw_file, buf, count);
> +	if (ret)
> +		return ret;
> +
> +	return count;
> +}
> +
> +/* Firmware Version is returned as Major.Minor.Build */
> +static ssize_t ps8640_fw_version_show(struct device *dev,
> +				      struct device_attribute *attr, char *buf)
> +{
> +	struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> +	struct ps8640_info *info = &ps_bridge->info;
> +
> +	return scnprintf(buf, PAGE_SIZE, "%u.%u\n", info->version >> 8,
> +			 info->version & 0xff);
> +}
> +
> +/* Hardware Version is returned as FamilyID.VariantID */
> +static ssize_t ps8640_hw_version_show(struct device *dev,
> +				      struct device_attribute *attr, char *buf)
> +{
> +	struct ps8640 *ps_bridge = dev_get_drvdata(dev);
> +	struct ps8640_info *info = &ps_bridge->info;
> +
> +	return scnprintf(buf, PAGE_SIZE, "ps%u.%u\n", info->family_id,
> +			 info->variant_id);
> +}
> +
> +static int ps8640_spi_send_cmd(struct ps8640 *ps_bridge, u8 *cmd, u8 cmd_len)
> +{
> +	struct i2c_client *client = ps_bridge->page[2];
> +	u8 i;
> +	int ret;
> +
> +	ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE);
> +	if (ret)
> +		goto err;
> +
> +	/* write command in write port */
> +	for (i = 0; i < cmd_len; i++) {
> +		ret = ps8640_regw_byte(client, PAGE2_SWSPI_WDATA, cmd[i]);
> +		if (ret)
> +			goto err;
> +	}
> +	/*	command length */
> +	ret = ps8640_regw_byte(client, PAGE2_SWSPI_LEN, cmd_len - 1);
> +	if (ret)
> +		goto err;
> +	/*	trigger read */
> +	ret = ps8640_regw_byte(client, PAGE2_SWSPI_CTL, TRIGGER_NO_READBACK);
> +	if (ret)
> +		goto err;
> +
> +	ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE);
> +	if (ret)
> +		goto err;
> +
> +	return 0;
> +
> +err:
> +	dev_err(&client->dev, "send command err: %d\n", ret);
> +	return ret;
> +}
> +
> +static int ps8640_wait_spi_ready(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[2];
> +	u8 spi_rdy_st, retry_cnt = 0;
> +
> +	do {
> +		ps8640_regr(client, PAGE2_SPI_STATUS, &spi_rdy_st, 1);
> +		msleep(20);
> +		if ((retry_cnt == SPI_MAX_RETRY_CNT) &&
> +		    ((spi_rdy_st & 0x0c) != 0x0c)) {
> +			dev_err(&client->dev, "wait spi ready timeout\n");
> +			return -EBUSY;
> +		}
> +	} while ((retry_cnt++ < SPI_MAX_RETRY_CNT) &&
> +		 (spi_rdy_st & 0x0c) == 0x0c);
> +
> +	return 0;
> +}
> +
> +static int ps8640_wait_spi_nobusy(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[2];
> +	u8 spi_status, retry_cnt = 0;
> +	int ret;
> +
> +	do {
> +		/*  0x05 RDSR; Read-Status-Register */
> +		ret = ps8640_regw_byte(client, PAGE2_SWSPI_WDATA, 0x05);
> +		if (ret)
> +			goto err_send_cmd_exit;
> +
> +		/*  command length */
> +		ret = ps8640_regw_byte(client, PAGE2_SWSPI_LEN, 0x00);
> +		if (ret)
> +			goto err_send_cmd_exit;
> +
> +		/*  trigger read */
> +		ret = ps8640_regw_byte(client, PAGE2_SWSPI_CTL,
> +				       TRIGGER_READBACK);
> +		if (ret)
> +			goto err_send_cmd_exit;
> +
> +		/* delay for cmd send */
> +		usleep_range(100, 300);
> +		/* wait for SPI ROM until not busy */
> +		ret = ps8640_regr(client, PAGE2_SWSPI_RDATA, &spi_status, 1);
> +		if (ret)
> +			goto err_send_cmd_exit;
> +	} while ((retry_cnt++ < SPI_MAX_RETRY_CNT) &&
> +		 (spi_status & 0x0c) == 0x0c);
> +
> +	if ((retry_cnt > SPI_MAX_RETRY_CNT) && (spi_status & 0x0c) != 0x0c) {
> +		ret = -EBUSY;
> +		dev_err(&client->dev, "wait spi no busy timeout: %d\n", ret);
> +		goto err_timeout;
> +	}
> +
> +	return 0;
> +
> +err_send_cmd_exit:
> +	dev_err(&client->dev, "send command err: %d\n", ret);
> +
> +err_timeout:
> +	return ret;
> +}
> +
> +static int ps8640_wait_rom_idle(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[0];
> +	int ret;
> +
> +	ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE);
> +	if (ret)
> +		goto exit;
> +
> +	ret = ps8640_wait_spi_ready(ps_bridge);
> +	if (ret)
> +		goto exit;
> +
> +	ret = ps8640_wait_spi_nobusy(ps_bridge);
> +	if (ret)
> +		goto exit;
> +
> +	ret = ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE);
> +	if (ret)
> +		goto exit;
> +
> +exit:
> +	if (ret)
> +		dev_err(&client->dev, "wait ps8640 rom idle fail: %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static int ps8640_spi_dl_mode(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[2];
> +	int ret;
> +
> +	/* switch ps8640 mode to spi dl mode */
> +	gpiod_set_value(ps_bridge->gpio_mode_sel_n, 0);
> +
> +	/* reset spi interface */
> +	ret = ps8640_regw_byte(client, PAGE2_SW_REST, 0xc0);
> +	if (ret)
> +		goto exit;
> +
> +	ret = ps8640_regw_byte(client, PAGE2_SW_REST, 0x40);
> +	if (ret)
> +		goto exit;
> +
> +exit:
> +	if (ret)
> +		dev_err(&client->dev, "fail reset spi interface: %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static int ps8640_rom_prepare(struct ps8640 *ps_bridge)
> +{
> +	struct i2c_client *client = ps_bridge->page[2];
> +	struct device *dev = &client->dev;
> +	u8 i, cmd[2];
> +	int ret;
> +
> +	/*	Enable-Write-Status-Register */
> +	cmd[0] = 0x06;
> +	ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> +	if (ret) {
> +		dev_err(dev, "failed enable-write-status-register: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* disable all protection */
> +	cmd[0] = 0x01;
> +	cmd[1] = 0x00;
> +	ret = ps8640_spi_send_cmd(ps_bridge, cmd, 2);
> +	if (ret) {
> +		dev_err(dev, "fail disable all protection: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* wait for SPI module ready */
> +	ret = ps8640_wait_rom_idle(ps_bridge);
> +	if (ret) {
> +		dev_err(dev, "fail wait rom idle: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE);
> +	for (i = 0; i < 6; i++)
> +		ps8640_regw_byte(client, PAGE2_ENCTLSPI_WR, enc_ctrl_code[i]);
> +	ps8640_regw_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE);
> +
> +	/*	Enable-Write-Status-Register */
> +	cmd[0] = 0x06;
> +	ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> +	if (ret) {
> +		dev_err(dev, "fail enable-write-status-register: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* chip erase command */
> +	cmd[0] = 0xc7;
> +	ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> +	if (ret) {
> +		dev_err(dev, "fail disable all protection: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = ps8640_wait_rom_idle(ps_bridge);
> +	if (ret) {
> +		dev_err(dev, "fail wait rom idle: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ps8640_validate_firmware(struct ps8640 *ps_bridge,
> +				    const struct firmware *fw)
> +{
> +	struct i2c_client *client = ps_bridge->page[0];
> +	struct ps8640_info *info = &ps_bridge->info;
> +	u16 fw_chip_id, fw_version_id;
> +
> +	/*
> +	 * Get the chip_id from the firmware. Make sure that it is the
> +	 * right controller to do the firmware and config update.
> +	 */
> +	fw_chip_id = get_unaligned_le16(fw->data + FW_CHIP_ID_OFFSET);
> +
> +	if (fw_chip_id != 0x8640) {
> +		dev_err(&client->dev,
> +			"chip id mismatch: fw 0x%x vs. chip 0x8640\n",
> +			fw_chip_id);
> +		return -ENODEV;
> +	}
> +
> +	fw_version_id = get_unaligned_le16(fw->data + FW_VERSION_OFFSET);
> +
> +	if (fw_chip_id != info->version) {
> +		dev_err(&client->dev,
> +			"fw version mismatch: fw %d.%d vs. chip %d.%d\n",
> +			fw_version_id >> 8, fw_version_id & 0xff,
> +			info->version >> 8, info->version & 0xff);
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ps8640_write_rom(struct ps8640 *ps_bridge, const struct firmware *fw)
> +{
> +	struct i2c_client *client = ps_bridge->page[0];
> +	struct device *dev = &client->dev;
> +	struct i2c_client *client2 = ps_bridge->page[2];
> +	struct i2c_client *client7 = ps_bridge->page[7];
> +	unsigned int pos = 0;
> +	u8 progress_cnt, rom_page_id[2];
> +	int ret;
> +
> +	ps8640_regw_byte(client2, PAGE2_SPI_CFG3, I2C_TO_SPI_RESET);
> +	msleep(100);
> +	ps8640_regw_byte(client2, PAGE2_SPI_CFG3, 0x00);
> +
> +	while (pos < fw->size) {
> +		rom_page_id[0] = (pos >> 8) & 0xFF;
> +		rom_page_id[1] = (pos >> 16) & 0xFF;
> +		ret = ps8640_regw(client2, PAGE2_ROMADD_BYTE1, rom_page_id, 2);
> +		if (ret)
> +			goto error;
> +		ret = ps8640_regw(client7, 0, fw->data + pos, 256);
> +		if (ret)
> +			goto error;
> +
> +		pos += 256;
> +		if (progress_cnt != (pos * 100) / fw->size) {
> +			progress_cnt = (pos * 100) / fw->size;
> +			dev_info(dev, "fw update progress percent %d\n",
> +				 progress_cnt);
> +		}
> +	}
> +	return 0;
> +
> +error:
> +	dev_err(dev, "failed write extenal flash, %d\n", ret);
> +	return ret;
> +}
> +
> +static int ps8640_spi_normal_mode(struct ps8640 *ps_bridge)
> +{
> +	u8 cmd[2];
> +	struct i2c_client *client = ps_bridge->page[2];
> +
> +	/*  Enable-Write-Status-Register */
> +	cmd[0] = 0x06;
> +	ps8640_spi_send_cmd(ps_bridge, cmd, 1);
> +
> +	/* protect BPL/BP0/BP1 */
> +	cmd[0] = 0x01;
> +	cmd[1] = 0x8c;
> +	ps8640_spi_send_cmd(ps_bridge, cmd, 2);
> +
> +	/* wait for SPI rom ready */
> +	ps8640_wait_rom_idle(ps_bridge);
> +
> +     /* disable PS8640 mapping function */
> +	ps8640_regw_byte(client, PAGE2_ENCTLSPI_WR, 0x00);
> +
> +	gpiod_set_value(ps_bridge->gpio_mode_sel_n, 1);
> +	return 0;
> +}
> +
> +static int ps8640_enter_bl(struct ps8640 *ps_bridge)
> +{
> +	int ret;
> +
> +	ret = ps8640_spi_dl_mode(ps_bridge);
> +	if (ret)
> +		return ret;
> +
> +	ps_bridge->in_fw_update = true;
> +	return 0;
> +}
> +
> +static void ps8640_exit_bl(struct ps8640 *ps_bridge, const struct firmware *fw)
> +{
> +	ps_bridge->in_fw_update = false;
> +	ps8640_spi_normal_mode(ps_bridge);
> +}
> +
> +static int ps8640_load_fw(struct ps8640 *ps_bridge, const struct firmware *fw)
> +{
> +	struct i2c_client *client = ps_bridge->page[0];
> +	struct device *dev = &client->dev;
> +	int ret;
> +	bool ps8640_status_backup = ps_bridge->enabled;
> +
> +	if (!ps8640_in_bootloader(ps_bridge)) {
> +		if (!ps8640_status_backup)
> +			ps8640_prepare(ps_bridge);
> +
> +		ret = ps8640_enter_bl(ps_bridge);
> +		if (ret)
> +			goto exit;
> +	}
> +
> +	ret = ps8640_validate_firmware(ps_bridge, fw);
> +	if (ret)
> +		goto exit;
> +
> +	ret = ps8640_rom_prepare(ps_bridge);
> +	if (ret)
> +		goto exit;
> +
> +	ret = ps8640_write_rom(ps_bridge, fw);
> +
> +exit:
> +	if (ret)
> +		dev_err(dev, "Failed to load firmware, %d\n", ret);
> +
> +	ps8640_exit_bl(ps_bridge, fw);
> +	if (!ps8640_status_backup)
> +		ps8640_disable(&ps_bridge->bridge);
> +	return ret;
> +}
> +
> +static ssize_t ps8640_update_fw_store(struct device *dev,
> +				      struct device_attribute *attr,
> +				      const char *buf, size_t count)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct ps8640 *ps_bridge = i2c_get_clientdata(client);
> +	const struct firmware *fw;
> +	int error;
> +
> +	error = request_firmware(&fw, ps_bridge->fw_file, dev);
> +	if (error) {
> +		dev_err(dev, "Unable to open firmware %s: %d\n",
> +			ps_bridge->fw_file, error);
> +		return error;
> +	}
> +
> +	error = ps8640_load_fw(ps_bridge, fw);
> +	if (error)
> +		dev_err(dev, "The firmware update failed(%d)\n", error);
> +	else
> +		dev_info(dev, "The firmware update succeeded\n");
> +
> +	release_firmware(fw);
> +	return error ? error : count;
> +}
> +
> +static DEVICE_ATTR(fw_file, S_IRUGO | S_IWUSR, ps8640_fw_file_show,
> +		   ps8640_fw_file_store);
> +static DEVICE_ATTR(fw_version, S_IRUGO, ps8640_fw_version_show, NULL);
> +static DEVICE_ATTR(hw_version, S_IRUGO, ps8640_hw_version_show, NULL);
> +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, ps8640_update_fw_store);
> +
> +static struct attribute *ps8640_attrs[] = {
> +	&dev_attr_fw_file.attr,
> +	&dev_attr_fw_version.attr,
> +	&dev_attr_hw_version.attr,
> +	&dev_attr_update_fw.attr,
> +	NULL
> +};
> +
> +static const struct attribute_group ps8640_attr_group = {
> +	.attrs = ps8640_attrs,
> +};
> +
> +static void ps8640_remove_sysfs_group(void *data)
> +{
> +	struct ps8640 *ps_bridge = data;
> +
> +	sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group);
> +}
> +
> +/* for fireware update end */
> +
> +static int ps8640_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct ps8640 *ps_bridge;
> +	struct device_node *np = dev->of_node;
> +	struct device_node *port, *out_ep;
> +	struct device_node *panel_node = NULL;
> +	int i, ret;
> +
> +	ps_bridge = devm_kzalloc(dev, sizeof(*ps_bridge), GFP_KERNEL);
> +	if (!ps_bridge) {
> +		ret = -ENOMEM;
> +		goto exit;
> +	}
> +	/* port at 1 is ps8640 output port */
> +	port = of_graph_get_port_by_id(np, 1);
> +	if (port) {
> +		out_ep = of_get_child_by_name(port, "endpoint");
> +		of_node_put(port);
> +		if (out_ep) {
> +			panel_node = of_graph_get_remote_port_parent(out_ep);
> +			of_node_put(out_ep);
> +		}
> +	}
> +	if (panel_node) {
> +		ps_bridge->panel = of_drm_find_panel(panel_node);
> +		of_node_put(panel_node);
> +		if (!ps_bridge->panel) {
> +			ret = -EPROBE_DEFER;
> +			goto exit;
> +		}
> +	}
> +
> +	ps_bridge->pwr_3v3_supply = devm_regulator_get(dev, "vdd33");
> +	if (IS_ERR(ps_bridge->pwr_3v3_supply)) {
> +		ret = PTR_ERR(ps_bridge->pwr_3v3_supply);
> +		dev_err(dev, "cannot get vdd33 supply: %d\n", ret);
> +		goto exit;
> +	}
> +
> +	ps_bridge->pwr_1v2_supply = devm_regulator_get(dev, "vdd12");
> +	if (IS_ERR(ps_bridge->pwr_1v2_supply)) {
> +		ret = PTR_ERR(ps_bridge->pwr_1v2_supply);
> +		dev_err(dev, "cannot get vdd12 supply: %d\n", ret);
> +		goto exit;
> +	}
> +
> +	ps_bridge->gpio_mode_sel_n = devm_gpiod_get(&client->dev, "mode-sel",
> +						    GPIOD_OUT_HIGH);
> +	if (IS_ERR(ps_bridge->gpio_mode_sel_n)) {
> +		ret = PTR_ERR(ps_bridge->gpio_mode_sel_n);
> +		dev_err(dev, "cannot get gpio_mode_sel_n %d\n", ret);
> +		goto exit;
> +	}
> +
> +	ps_bridge->gpio_slp_n = devm_gpiod_get(&client->dev, "sleep",
> +					       GPIOD_OUT_HIGH);
> +	if (IS_ERR(ps_bridge->gpio_slp_n)) {
> +		ret = PTR_ERR(ps_bridge->gpio_slp_n);
> +		dev_err(dev, "cannot get gpio_slp_n: %d\n", ret);
> +		goto exit;
> +	}
> +
> +	ps_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset",
> +					       GPIOD_OUT_HIGH);
> +	if (IS_ERR(ps_bridge->gpio_rst_n)) {
> +		ret = PTR_ERR(ps_bridge->gpio_rst_n);
> +		dev_err(dev, "cannot get gpio_rst_n: %d\n", ret);
> +		goto exit;
> +	}
> +
> +	ps_bridge->bridge.funcs = &ps8640_bridge_funcs;
> +	ps_bridge->bridge.of_node = dev->of_node;
> +	ret = drm_bridge_add(&ps_bridge->bridge);
> +	if (ret) {
> +		dev_err(dev, "Failed to add bridge: %d\n", ret);
> +		goto exit;
> +	}
> +
> +	ret = ps8640_update_file_name(&client->dev, &ps_bridge->fw_file,
> +				      PS_FW_NAME, strlen(PS_FW_NAME));
> +	if (ret) {
> +		dev_err(dev, "failed to update file name: %d\n", ret);
> +		goto exit;
> +	}
> +
> +	ps_bridge->page[0] = client;
> +
> +	/* ps8640 uses multiple addresses, use dummy devices for them
> +	  * page[0]: for DP control
> +	  * page[1]: for VIDEO Bridge
> +	  * page[2]: for control top
> +	  * page[3]: for DSI Link Control1
> +	  * page[4]: for MIPI Phy
> +	  * page[5]: for VPLL
> +	  * page[6]: for DSI Link Control2
> +	  * page[7]: for spi rom mapping
> +	*/
> +	for (i = 1; i < 8; i++) {
> +		ps_bridge->page[i] = i2c_new_dummy(client->adapter,
> +						   client->addr + i);
> +		if (!ps_bridge->page[i]) {
> +			dev_err(dev, "failed i2c dummy device, address%02x\n",
> +				client->addr + i);
> +			ret = -EBUSY;
> +			goto exit_dummy;
> +		}
> +	}
> +	i2c_set_clientdata(client, ps_bridge);
> +
> +	ret = sysfs_create_group(&client->dev.kobj, &ps8640_attr_group);
> +	if (ret) {
> +		dev_err(dev, "failed to create sysfs entries: %d\n", ret);
> +		goto exit_dummy;
> +	}
> +
> +	ret = devm_add_action(dev, ps8640_remove_sysfs_group, ps_bridge);
> +	if (ret) {
> +		ps8640_remove_sysfs_group(ps_bridge);
> +		dev_err(dev, "failed to add sysfs cleanup action: %d\n", ret);
> +		goto exit_dummy;
> +	}
> +	return 0;
> +
> +exit_dummy:
> +	for (i = 1; i < 8; i++)
> +		if (ps_bridge->page[i])
> +			i2c_unregister_device(ps_bridge->page[i]);
> +
> +exit:
> +	return ret;
> +}
> +
> +static int ps8640_remove(struct i2c_client *client)
> +{
> +	struct ps8640 *ps_bridge = i2c_get_clientdata(client);
> +	int i;
> +
> +	for (i = 1; i < 8; i++)
> +		if (ps_bridge->page[i])
> +			i2c_unregister_device(ps_bridge->page[i]);
> +
> +	drm_bridge_remove(&ps_bridge->bridge);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id ps8640_i2c_table[] = {
> +	{"parade,ps8640", 0},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(i2c, ps8640_i2c_table);
> +
> +static const struct of_device_id ps8640_match[] = {
> +	{ .compatible = "parade,ps8640" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, ps8640_match);
> +
> +static struct i2c_driver ps8640_driver = {
> +	.id_table = ps8640_i2c_table,
> +	.probe = ps8640_probe,
> +	.remove = ps8640_remove,
> +	.driver = {
> +		.name = "parade,ps8640",
> +		.of_match_table = ps8640_match,
> +	},
> +};
> +module_i2c_driver(ps8640_driver);
> +
> +MODULE_AUTHOR("Jitao Shi <jitao.shi at mediatek.com>");
> +MODULE_AUTHOR("CK Hu <ck.hu at mediatek.com>");
> +MODULE_DESCRIPTION("PARADE ps8640 DSI-eDP converter driver");
> +MODULE_LICENSE("GPL v2");
>

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, hosted by The Linux Foundation



More information about the Linux-mediatek mailing list