[PATCH] dt-bindings: MediaTek: Add binding document for the AUXADC

Matthias Brugger matthias.bgg at gmail.com
Wed Apr 20 04:24:09 PDT 2016



On 17/03/16 16:39, Matthias Brugger wrote:
> Hi Sascha,
>
> On 07/03/16 07:52, Sascha Hauer wrote:
>> On Wed, Feb 24, 2016 at 07:34:19PM +0100, Matthias Brugger wrote:
>>>
>>>
>>> On 24/02/16 16:12, Sascha Hauer wrote:
>>>> Hi Matthias,
>>>>
>>>> On Wed, Feb 24, 2016 at 03:36:46PM +0100, Matthias Brugger wrote:
>>>>>
>>>>>
>>>>> On 23/02/16 21:32, Rob Herring wrote:
>>>>>> On Fri, Feb 19, 2016 at 08:18:46AM +0100, Sascha Hauer wrote:
>>>>>>> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
>>>>>>> ---
>>>>>>>
>>>>>>> This is a supplement to the MTK Thermal series which was lacking the
>>>>>>> description for the AUXADC.
>>>>>>
>>>>>> So it will be applied with that I presume.
>>>>>>
>>>>>> Acked-by: Rob Herring <robh at kernel.org>
>>>>>>
>>>>>
>>>>> Well the basic problem that I see is, that the auxadc has some more
>>>>> registers (at least in mt6589) for the touch screen registers.
>>>>> So this makes it a candidate for syscon and regmap.
>>>>> But this needs a patch in the thermal driver first...
>>>>
>>>> When we want to have a driver for the auxadc we are free to write one.
>>>> No need to use syscon and/or regmap for it.
>>>>
>>>> Note that the auxadc is not used by the thermal *driver*, it's used by
>>>> the thermal *hardware*. It's the hardware that directly reads/writes
>>>> auxadc registers. If MTK did it right then a real auxadc driver should
>>>> not be disturbed by the thermal controller accesses. At least from
>>>
>>> Right, didn't realize this.
>>>
>>>> checking the datasheet the registers the thermal controller accesses
>>>> are completely orthogonal to the ones a auxadc driver would use.
>>>>
>>>
>>> As you already explained, syscon/regmap is not needed here. Just for
>>> completion: we already had completely orthogonal registers for the reset
>>> controller, and we decided to use regmap there as well.
>>> We should stay consistent on this.
>>
>> Matthias, is this some kind of action topic for me? We can use regmap
>> for the AUXADC driver if we want to, I have no problem with that.
>>
>
> No, no need for that, I will take the patch as is. I will let you know
> when it got queued.
>
> Sorry for the delay.

Applied, thanks.



More information about the Linux-mediatek mailing list