[PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes

[Matthias Brugger]

On 30/11/15 12:42, Sascha Hauer wrote:
> This adds the thermal controller and auxadc nodes to the Mediatek MT8173
> dtsi file.
>
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>
> ---
>   arch/arm64/boot/dts/mediatek/mt8173.dtsi | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 06a1564..e2ddd03 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -277,6 +277,11 @@
>   				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>   		};
>
> +		auxadc: auxadc at 11001000 {
> +			compatible = "mediatek,mt8173-auxadc";
> +			reg = <0 0x11001000 0 0x1000>;
> +		};
> +
>   		uart0: serial at 11002000 {
>   			compatible = "mediatek,mt8173-uart",
>   				     "mediatek,mt6577-uart";
> @@ -487,6 +492,18 @@
>   			clock-names = "source", "hclk";
>   			status = "disabled";
>   		};
> +
> +		thermal: thermal at 1100b000 {
> +			#thermal-sensor-cells = <0>;
> +			compatible = "mediatek,mt8173-thermal";
> +			reg = <0 0x1100b000 0 0x1000>;
> +			interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
> +			clock-names = "therm", "auxadc";
> +			resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
> +			mediatek,auxadc = <&auxadc>;
> +			mediatek,apmixedsys = <&apmixedsys>;
> +		};
>   	};
>   };
>
>

Applied with the ACK from Eduardo.
Thanks.