[PATCH v3 2/6] dt-bindings: phy: Add rockchip,rk3568-edp-phy

[Rob Herring]

On Fri, Oct 23, 2026 at 11:56:10AM +0800, Damon Ding wrote:
> Hi Rob,
> 
> On 10/21/2026 9:34 PM, Rob Herring wrote:
> > On Tue, Oct 20, 2026 at 11:09:12AM +0800, Damon Ding wrote:
> > > Document the eDP transmitter PHY with NaNeng IP block found on the
> > > RK3568 SoC.  The PHY is controlled through the eDP PHY GRF registers,
> > > so its node is modeled as a child of the eDP PHY GRF syscon.  Also
> > > add the "rockchip,rk3568-edp-phy-grf" compatible and the "edp-phy"
> > > child node reference to the Rockchip GRF schema.
> > > 
> > > Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
> > > ---
> > >   .../bindings/phy/rockchip,rk3568-edp-phy.yaml | 59 +++++++++++++++++++
> > >   .../devicetree/bindings/soc/rockchip/grf.yaml | 15 +++++
> > >   2 files changed, 74 insertions(+)
> > >   create mode 100644 Documentation/devicetree/bindings/phy/rockchip,rk3568-edp-phy.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/phy/rockchip,rk3568-edp-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,rk3568-edp-phy.yaml
> > > new file mode 100644
> > > index 000000000000..afe7bc3d839e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/phy/rockchip,rk3568-edp-phy.yaml
> > > @@ -0,0 +1,59 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/phy/rockchip,rk3568-edp-phy.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Rockchip eDP Transmitter PHY with NaNeng IP block
> > > +
> > > +maintainers:
> > > +  - Damon Ding <damon.ding at rock-chips.com>
> > > +  - Heiko Stuebner <heiko at sntech.de>
> > > +
> > > +description:
> > > +  On the RK3568 SoC the eDP PHY is controlled through the eDP PHY GRF
> > > +  registers, therefore the PHY node is expected to be a child of the
> > > +  eDP PHY GRF syscon node.
> > 
> >  From the driver, looks like there is a specific register range for the
> > phy regs in the GRF, so please add a 'reg' entry (and 'ranges' in the
> > parent).
> > 
> 
> I see. For v4, I will add the reg entry for the PHY node and ranges in the
> parent syscon node, as done in rk3399-emmc-phy.
> 
> The proposed eDP PHY DT layout looks like:
> 
> edp_phy_grf: syscon at fdcb0000 {
>   compatible = "rockchip,rk3568-edp-phy-grf", "syscon", "simple-mfd";
>   reg = <0x0 0xfdcb0000 0x0 0x100>;
>   clocks = <&cru PCLK_EDPPHY_GRF>;
>   #address-cells = <1>;
>   #size-cells = <1>;
>   ranges;
> 
>   edp_phy: phy at 0 {
> 	compatible = "rockchip,rk3568-edp-phy";
> 	reg = <0x0 0x100>;

The 0 address is not correct with empty 'ranges'.

Rob