[PATCH v7 02/16] arm64: ras: Add probe/remove for arm64_ras driver

[Umang Chheda]

Hello Ruidong,

On 6/2/2026 12:45 PM, Ruidong Tian wrote:
> Introduce the back-end platform driver that binds to the devices
> created by the AEST front-end. Driver input is taken exclusively from
> fwnode properties, so the same probe path serves any future front-end
> (DT, hand-rolled) without conditional code.
> 
> The probe builds two layers of state:
> 
>   - struct ras_node:   one AEST error source
>   - struct ras_record: one error record inside a node
> 
> This split mirrors the hardware: a node owns the shared MMIO/ERRGSR
> window and policy, while records are the unit at which errors are
> reported, masked and polled. Later patches plug interrupts, decoding,
> storm mitigation and userspace ABI onto these two objects without
> touching the front-end.
> 
> Signed-off-by: Umang Chheda <umang.chheda at oss.qualcomm.com>
> Signed-off-by: Ruidong Tian <tianruidong at linux.alibaba.com>
> ---
[...]

> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +obj-$(CONFIG_ARM64_RAS_DRIVER) 	+= arm64_ras.o
> +
> +arm64_ras-y		:= ras-core.o
> diff --git a/drivers/ras/arm64/ras-core.c b/drivers/ras/arm64/ras-core.c
> new file mode 100644
> index 000000000000..b5448f4a841f
> --- /dev/null
> +++ b/drivers/ras/arm64/ras-core.c
> @@ -0,0 +1,266 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ARM Error Source Table Support
> + *
> + * Copyright (c) 2025, Alibaba Group.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/ras.h>
> +
> +#include "ras.h"
> +
> +#undef pr_fmt
> +#define pr_fmt(fmt) "arm64_ras: " fmt
> +
> +static const char *const ras_node_name[] = {
> +	[ACPI_AEST_PROCESSOR_ERROR_NODE] = "processor",
> +	[ACPI_AEST_MEMORY_ERROR_NODE] = "memory",
> +	[ACPI_AEST_SMMU_ERROR_NODE] = "smmu",
> +	[ACPI_AEST_VENDOR_ERROR_NODE] = "vendor",
> +	[ACPI_AEST_GIC_ERROR_NODE] = "gic",
> +	[ACPI_AEST_PCIE_ERROR_NODE] = "pcie",
> +	[ACPI_AEST_PROXY_ERROR_NODE] = "proxy",
> +};

Now that the ARM RAS core framework is shared by both ACPI and DT
platforms, should we consider dropping the "ACPI_AEST" naming in the
common code and replacing it with a more generic prefix maybe something
like "ARM_RAS" ?

[...]
> +
> +const struct ras_group ras_group_config[] = {
> +	[ACPI_AEST_NODE_GROUP_FORMAT_4K] = {
> +		.errgsr_num = ERXGROUP_4K_ERRGSR_NUM,
> +		.size = ERXGROUP_4K_SIZE,
> +		.errgsr_offset = ERXGROUP_4K_OFFSET,
> +	},
> +	[ACPI_AEST_NODE_GROUP_FORMAT_16K] = {
> +		.errgsr_num = ERXGROUP_16K_ERRGSR_NUM,
> +		.size = ERXGROUP_16K_SIZE,
> +		.errgsr_offset = ERXGROUP_16K_OFFSET,
> +	},
> +	[ACPI_AEST_NODE_GROUP_FORMAT_64K] = {
> +		.errgsr_num = ERXGROUP_64K_ERRGSR_NUM,
> +		.size = ERXGROUP_64K_SIZE,
> +		.errgsr_offset = ERXGROUP_64K_OFFSET,
> +	},
> +};
> +
Thanks,
Umang