[PATCH v1] arm64: dts: colibri-imx8x-aster: Enable I2C bus

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

The Colibri standard I2C bus (SODIMM 194/196) is available on the Aster
carrier board on the 40-pin extension header X20, the Arduino UNO header
X18 and the capacitive touch connector X3, with pull-ups on the carrier.

Enable the bus to allow userspace access to I2C devices connected
through this interface.

Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
index f7bbb2153ae0..11b1d45e5dfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
@@ -26,6 +26,11 @@ &fec1 {
 	status = "okay";
 };
 
+/* Colibri I2C */
+&i2c1 {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog0>;
-- 
2.47.3