[PATCH v4 08/10] gpio: mxc: use local dev variable

[Frank Li]

On Wed, Oct 07, 2026 at 06:44:23PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> Introduce a local 'struct device *dev' variable to replace repeated
> '&pdev->dev' dereferences throughout mxc_gpio_probe(), improving
> readability.
>
> No functional change.
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li at nxp.com>

>  drivers/gpio/gpio-mxc.c | 43 ++++++++++++++++++++++---------------------
>  1 file changed, 22 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index f5f9ef1564cd..9d69524e06db 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -449,18 +449,19 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  {
>  	struct gpio_generic_chip_config config = { };
>  	struct device_node *np = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
>  	struct irq_domain_info d_info;
>  	struct mxc_gpio_port *port;
>  	int irq_count;
>  	int irq_base;
>  	int err;
>
> -	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
> +	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
>  	if (!port)
>  		return -ENOMEM;
>
> -	port->dev = &pdev->dev;
> -	port->hwdata = device_get_match_data(&pdev->dev);
> +	port->dev = dev;
> +	port->hwdata = device_get_match_data(dev);
>
>  	port->base = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(port->base))
> @@ -481,17 +482,17 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  		return port->irq;
>
>  	/* the controller clock is optional */
> -	port->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
> +	port->clk = devm_clk_get_optional_enabled(dev, NULL);
>  	if (IS_ERR(port->clk))
>  		return PTR_ERR(port->clk);
>
> -	err = devm_pm_runtime_get_noresume(&pdev->dev);
> +	err = devm_pm_runtime_get_noresume(dev);
>  	if (err)
> -		return dev_err_probe(&pdev->dev, err, "Failed to get PM runtime\n");
> +		return dev_err_probe(dev, err, "Failed to get PM runtime\n");
>
> -	err = devm_pm_runtime_set_active_enabled(&pdev->dev);
> +	err = devm_pm_runtime_set_active_enabled(dev);
>  	if (err)
> -		return dev_err_probe(&pdev->dev, err, "Failed to enable PM runtime\n");
> +		return dev_err_probe(dev, err, "Failed to enable PM runtime\n");
>
>  	/* disable the interrupt and clear the status */
>  	writel(0, port->base + GPIO_IMR);
> @@ -508,7 +509,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	} else
>  		port->mx_irq_handler = mx3_gpio_irq_handler;
>
> -	config.dev = &pdev->dev;
> +	config.dev = dev;
>  	config.sz = 4;
>  	config.dat = port->base + GPIO_PSR;
>  	config.set = port->base + GPIO_DR;
> @@ -517,7 +518,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
>  	err = gpio_generic_chip_init(&port->gen_gc, &config);
>  	if (err)
> -		return dev_err_probe(&pdev->dev, err, "Failed to init gpio chip\n");
> +		return dev_err_probe(dev, err, "Failed to init gpio chip\n");
>
>  	port->gen_gc.gc.request = mxc_gpio_request;
>  	port->gen_gc.gc.free = mxc_gpio_free;
> @@ -531,41 +532,41 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  	else /* silence boot time warning */
>  		port->gen_gc.gc.base = -1;
>
> -	err = devm_gpiochip_add_data(&pdev->dev, &port->gen_gc.gc, port);
> +	err = devm_gpiochip_add_data(dev, &port->gen_gc.gc, port);
>  	if (err)
> -		return dev_err_probe(&pdev->dev, err, "Failed to add gpiochip data\n");
> +		return dev_err_probe(dev, err, "Failed to add gpiochip data\n");
>
> -	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
> +	irq_base = devm_irq_alloc_descs(dev, -1, 0, 32, numa_node_id());
>  	if (irq_base < 0)
> -		return dev_err_probe(&pdev->dev, irq_base, "Failed to alloc irq desc\n");
> +		return dev_err_probe(dev, irq_base, "Failed to alloc irq desc\n");
>
>  	d_info = (struct irq_domain_info) {
> -		.fwnode		= dev_fwnode(&pdev->dev),
> +		.fwnode		= dev_fwnode(dev),
>  		.size		= 32,
>  		.hwirq_max	= 32,
>  		.virq_base	= irq_base,
>  		.ops		= &irq_domain_simple_ops,
> -		.dev		= &pdev->dev,
> +		.dev		= dev,
>  	};
>
> -	port->domain = devm_irq_domain_instantiate(&pdev->dev, &d_info);
> +	port->domain = devm_irq_domain_instantiate(dev, &d_info);
>  	if (IS_ERR(port->domain))
> -		return dev_err_probe(&pdev->dev, PTR_ERR(port->domain),
> +		return dev_err_probe(dev, PTR_ERR(port->domain),
>  				     "Failed to create irq domain\n");
>
> -	irq_domain_set_pm_device(port->domain, &pdev->dev);
> +	irq_domain_set_pm_device(port->domain, dev);
>
>  	/* gpio-mxc can be a generic irq chip */
>  	err = mxc_gpio_init_gc(port, irq_base);
>  	if (err < 0)
> -		return dev_err_probe(&pdev->dev, err, "Failed to init generic irq chip\n");
> +		return dev_err_probe(dev, err, "Failed to init generic irq chip\n");
>
>  	list_add_tail(&port->node, &mxc_gpio_ports);
>
>  	mxc_update_irq_chained_handler(port, true);
>
>  	platform_set_drvdata(pdev, port);
> -	pm_runtime_put_autosuspend(&pdev->dev);
> +	pm_runtime_put_autosuspend(dev);
>
>  	return 0;
>  }
>
> --
> 2.51.0
>
>