[PATCH 1/3] dt-bindings: iio: adc: add bindings for stm32 mdf filter

[Krzysztof Kozlowski]

On Thu, Oct 01, 2026 at 04:56:45PM +0200, Olivier Moysan wrote:
> +  clock-output-names:
> +    description: |
> +      CCK0 and CCK1 are optional output clocks, which share the same clock frequency,
> +      but can be gated independently to save power.
> +    minItems: 1
> +    maxItems: 2
> +    oneOf:
> +      - items:
> +          - const: cck0
> +      - items:
> +          - const: cck1
> +      - items:
> +          - const: cck0
> +          - const: cck1

Use simpler notation:
minItems: 1
items:
  - enum
  - const

> +
> +  clock-frequency:
> +    description: |

Drop | when not needed.

> +      Common clock frequency (Hz) for CCK0 and CCK1 output clocks.
> +      The frequency must be a multiple of the "ker_ck" clock frequency.
> +    maximum: 25000000

So here is the clock-frequency. No, these are output clocks as written
above, so consumer sets it, not the provider. Or use existing assigned
properties. This is even mentioned on DTS101 slides, really...

Best regards,
Krzysztof