[PATCH v1 2/7] ARM: dts: imx7d-colibri-emmc: Add missing touch display overlays to dtb-y

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

The Capacitive Touch Display 7" Parallel with Touch Adapter and the
Resistive Touch Display 7" Parallel overlays are only built as a
dependency of the combined Eval carrier board DTBs and are not listed in
dtb-y, so the standalone .dtbo files are not installed by dtbs_install.

Add them to dtb-y like the other Colibri iMX7 eMMC overlays.

Fixes: 64e7d6ba2037 ("ARM: dts: imx7d-colibri-emmc: Add Toradex Capacitive Touch Display 7" Parallel with Touch Adapter")
Fixes: 392bbdb0357b ("ARM: dts: imx7d-colibri-emmc: Add Toradex Resistive Touch Display 7" Parallel")
Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 arch/arm/boot/dts/nxp/imx/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index c5caca92ea10..0aece8cc9fe4 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -468,6 +468,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-colibri-emmc-eval-v3-panel-res-touch-7inch-parallel.dtb \
 	imx7d-colibri-emmc-eval-v3-vga.dtb \
 	imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtbo \
+	imx7d-colibri-emmc-panel-cap-touch-7inch-parallel-touch-adapter.dtbo \
+	imx7d-colibri-emmc-panel-res-touch-7inch-parallel.dtbo \
 	imx7d-colibri-emmc-vga.dtbo \
 	imx7d-colibri-eval-v3.dtb \
 	imx7d-colibri-iris.dtb \
-- 
2.47.3