[PATCH 2/4] drm/panel: himax-hx8279: add the VDDP supply

[Neil Armstrong]

On 10/6/26 22:25, David Lechner wrote:
> Get and enable the vddp-supply along with VDD and IOVCC.
> 
> The Startek KD070FHFID078 panel has a VDDP power input, which the
> MediaTek Genio 520 and 720 EVKs switch with a regulator of its own, so
> the driver has to enable it for the panel to be powered on those boards.
> 
> On boards that do not describe vddp-supply, the regulator core provides
> a dummy regulator, so they only see a "using dummy regulator" message.
> 
> Signed-off-by: David Lechner <dlechner at baylibre.com>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx8279.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8279.c b/drivers/gpu/drm/panel/panel-himax-hx8279.c
> index 9e443c719843..fe665cd3a3d2 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8279.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8279.c
> @@ -112,7 +112,7 @@
>   struct hx8279 {
>   	struct drm_panel panel;
>   	struct mipi_dsi_device *dsi[2];
> -	struct regulator_bulk_data vregs[2];
> +	struct regulator_bulk_data vregs[3];
>   	struct gpio_desc *enable_gpio;
>   	struct gpio_desc *reset_gpio;
>   	const struct hx8279_panel_desc *desc;
> @@ -769,6 +769,7 @@ static int hx8279_init_vregs(struct hx8279 *hx, struct device *dev)
>   
>   	hx->vregs[0].supply = "vdd";
>   	hx->vregs[1].supply = "iovcc";
> +	hx->vregs[2].supply = "vddp";
>   	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hx->vregs),
>   				      hx->vregs);
>   	if (ret < 0)
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>

Thanks,
Neil