[PATCH v5 3/7] drm/panel: simple: Add Waiken WKS101WX001-WCT panel support

[Neil Armstrong]

On 10/27/26 16:00, Frank.Li at oss.nxp.com wrote:
> From: Frank Li <Frank.Li at nxp.com>
> 
> Add support for the Waiken WKS101WX001-WCT, an industrial-grade 10.1-inch
> IPS TFT LCD panel with a capacitive touchscreen.
> 
> Although the module advertises LVDS support, enabling LVDS operation
> requires hardware modification, including the removal of several on-board
> resistors. As there are currently no known users of the LVDS configuration,
> only the default interface mode is supported.
> 
> Acked-by: Liu Ying <victor.liu at nxp.com>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> change in v5
> - drop "If LVDS..." in commit message (Liu ying).
> 
> change in v4
> - s/LDB/DPI
> - variable use 101wx001_wct
> 
> change in v3
> - add wct surfix and change to use MEDIA_BUS_FMT_RGB888_1X24
> - Add information about lvds support plan.
> 
> change in v2
> - update height to 135 from 136 (sashiko)
> ---
>   drivers/gpu/drm/panel/panel-simple.c | 31 +++++++++++++++++++++++++++++++
>   1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index d7dbd7442919b..5ef6a79f0de95 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -5252,6 +5252,34 @@ static const struct panel_desc vl050_8048nt_c01 = {
>   	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
>   };
>   
> +static const struct drm_display_mode waiken_101wx001_wct_mode = {
> +	.clock = 71100,
> +	.hdisplay = 1280,
> +	.hsync_start = 1280 + 70,
> +	.hsync_end = 1280 + 70 + 10,
> +	.htotal = 1280 + 70 + 10 + 80,
> +	.vdisplay = 800,
> +	.vsync_start = 800 + 10,
> +	.vsync_end = 800 + 10 + 3,
> +	.vtotal = 800 + 10 + 3 + 10,
> +	.width_mm = 217,
> +	.height_mm = 135,
> +	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +};
> +
> +static const struct panel_desc waiken_101wx001_wct_panel = {
> +	.modes = &waiken_101wx001_wct_mode,
> +	.num_modes = 1,
> +	.bpc = 8,
> +	.size = {
> +		.width = 217,
> +		.height = 135,
> +	},
> +	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> +	.connector_type = DRM_MODE_CONNECTOR_DPI,
> +	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> +};
> +
>   static const struct drm_display_mode waveshare_28_lcd_mode = {
>   	.clock = 50000,
>   	.hdisplay = 480,
> @@ -6248,6 +6276,9 @@ static const struct of_device_id platform_of_match[] = {
>   	}, {
>   		.compatible = "vxt,vl050-8048nt-c01",
>   		.data = &vl050_8048nt_c01,
> +	}, {
> +		.compatible = "waiken,101wx001-wct",
> +		.data = &waiken_101wx001_wct_panel,
>   	}, {
>   		.compatible = "waveshare,2.8inch-panel",
>   		.data = &waveshare_28_lcd_panel
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>

Thanks,
Neil