[PATCH 8/8] arm64: dts: qcom: shikra-iqs-evk-imx577-camera: Add DT overlay

[bod at kernel.org]

On 2026-05-26 22:42 +0530, Nihal Kumar Gupta wrote:
> Shikra IQS is an industrial-grade variant using PM8150 PMIC, requiring
> different CSIPHY and sensor supply rails compared to the retail boards
> (CQM and CQS) which use PM4125.
> 
> Add a dedicated overlay for optional IMX577 integration via CSIPHY1.
> 
> Signed-off-by: Nihal Kumar Gupta <nihal.gupta at oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile                  |  2 +
>  .../dts/qcom/shikra-iqs-evk-imx577-camera.dtso     | 63 ++++++++++++++++++++++
>  2 files changed, 65 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index df41830e18edff82893ca24ca84d7e03065d0ef7..2a728c975a38f700360e317307036efb0968a00f 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -340,9 +340,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk.dtb
>  
>  shikra-cqm-evk-imx577-camera-dtbs	:= shikra-cqm-evk.dtb shikra-cqm-evk-imx577-camera.dtbo
>  shikra-cqs-evk-imx577-camera-dtbs	:= shikra-cqs-evk.dtb shikra-cqm-evk-imx577-camera.dtbo
> +shikra-iqs-evk-imx577-camera-dtbs	:= shikra-iqs-evk.dtb shikra-iqs-evk-imx577-camera.dtbo
>  
>  dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk-imx577-camera.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk-imx577-camera.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk-imx577-camera.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
> diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso b/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso
> new file mode 100644
> index 0000000000000000000000000000000000000000..f0423f1ab4e93abdcc7cad8977b39e31b2437e8e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/clock/qcom,shikra-gcc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +&camss {
> +	vdd-csiphy-1p2-supply = <&pm8150_l11>;
> +	vdd-csiphy-1p8-supply = <&pm8150_l12>;
> +
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port at 1 {
> +			reg = <1>;
> +
> +			csiphy1_ep: endpoint {
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&imx577_ep1>;
> +			};
> +		};
> +	};
> +};
> +
> +&cci {
> +	status = "okay";
> +};
> +
> +&cci_i2c1 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	camera at 1a {
> +		compatible = "sony,imx577";
> +		reg = <0x1a>;
> +
> +		reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
> +		pinctrl-0 = <&mclk1_default>;
> +		pinctrl-names = "default";
> +
> +		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
> +		assigned-clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
> +		assigned-clock-rates = <24000000>;
> +
> +		dovdd-supply = <&pm8150_l15>;

I don't have your schematic BUT where are the rest of the regulators.

If they are absent or powered by the daughter board, a comment in the patch
would be warranted.

Same comment for previous patch.

> +		port {
> +			imx577_ep1: endpoint {
> +				link-frequencies = /bits/ 64 <600000000>;
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&csiphy1_ep>;
> +			};
> +		};
> +	};
> +};
> 
> -- 
> 2.34.1
> 
>