[PATCH 8/8] arm64: dts: qcom: shikra-iqs-evk-imx577-camera: Add DT overlay

[Nihal Kumar Gupta]

Shikra IQS is an industrial-grade variant using PM8150 PMIC, requiring
different CSIPHY and sensor supply rails compared to the retail boards
(CQM and CQS) which use PM4125.

Add a dedicated overlay for optional IMX577 integration via CSIPHY1.

Signed-off-by: Nihal Kumar Gupta <nihal.gupta at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  2 +
 .../dts/qcom/shikra-iqs-evk-imx577-camera.dtso     | 63 ++++++++++++++++++++++
 2 files changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index df41830e18edff82893ca24ca84d7e03065d0ef7..2a728c975a38f700360e317307036efb0968a00f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -340,9 +340,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk.dtb
 
 shikra-cqm-evk-imx577-camera-dtbs	:= shikra-cqm-evk.dtb shikra-cqm-evk-imx577-camera.dtbo
 shikra-cqs-evk-imx577-camera-dtbs	:= shikra-cqs-evk.dtb shikra-cqm-evk-imx577-camera.dtbo
+shikra-iqs-evk-imx577-camera-dtbs	:= shikra-iqs-evk.dtb shikra-iqs-evk-imx577-camera.dtbo
 
 dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk-imx577-camera.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk-imx577-camera.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk-imx577-camera.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso b/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..f0423f1ab4e93abdcc7cad8977b39e31b2437e8e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,shikra-gcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&camss {
+	vdd-csiphy-1p2-supply = <&pm8150_l11>;
+	vdd-csiphy-1p8-supply = <&pm8150_l12>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 1 {
+			reg = <1>;
+
+			csiphy1_ep: endpoint {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep1>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera at 1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&mclk1_default>;
+		pinctrl-names = "default";
+
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		assigned-clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&pm8150_l15>;
+
+		port {
+			imx577_ep1: endpoint {
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy1_ep>;
+			};
+		};
+	};
+};

-- 
2.34.1