[PATCH] arm64: dts: allwinner: Cubie A5E: enable SPI flash

[Andre Przywara]

Hi Chen-Yu,

thanks for chipping in!

On 5/13/26 07:21, Chen-Yu Tsai wrote:
> Hi,
> 
> On Tue, May 12, 2026 at 6:18 AM Andre Przywara <andre.przywara at arm.com> wrote:
>>
>> The Cubie A5E board comes with 16MiB of SPI NOR flash.
>>
>> Enable the SPI0 DT node and describe the configuration.
>>
>> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
>> ---
>>   .../boot/dts/allwinner/sun55i-a527-cubie-a5e.dts  | 15 +++++++++++++++
>>   1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
>> index bfdf1728cd14b..7ad22fc85d1fd 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
>> +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
>> @@ -344,6 +344,21 @@ &r_pio {
>>          vcc-pm-supply = <&reg_aldo3>;
>>   };
>>
>> +&spi0  {
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&spi0_pc_pins>, <&spi0_cs0_pc_pin>,
>> +                   <&spi0_hold_pc_pin>, <&spi0_wp_pc_pin>;
> 
> This whole thing needs to be an overlay. The HOLD and WP pins
> conflict with eMMC usage, so it seems that Radxa only populates
> one or the other.
> 
> If you look at the pictures on their official website, you'll see the
> SPI NOR chip populated, but not the eMMC chip. On the linux-sunxi wiki
> page, you'll see the opposite.

Well, I have a hard time spotting any actual eMMC SKUs in the shops anyway.
But you are right, the hold and WP pins conflict with eMMC, whereas the 
other pins are not.

> And you probably want to enable QSPI, like Sashiko mentioned.

Well, in the interest of keeping this simple and enabling the usage of 
SPI flash for all the users out there, I'd rather drop the extra pins.
This is mostly really useful for booting the firmware, maybe loading a 
tiny kernel or other data once, so performance is not a big concern in 
this use case. The BootROM surely does not use QSPI.

And as you say, if people are really interested in the last bit of 
performance, they can use an overlay.

Cheers,
Andre

> 
> 
> ChenYu
> 
> 
>> +       status = "okay";
>> +
>> +       flash at 0 {
>> +               compatible = "winbond,w25q128", "jedec,spi-nor";
>> +               reg = <0>;
>> +               spi-max-frequency = <40000000>;
>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +       };
>> +};
>> +
>>   &uart0 {
>>          pinctrl-names = "default";
>>          pinctrl-0 = <&uart0_pb_pins>;
>> --
>> 2.46.4
>>
>