[PATCH 4/6] ARM: dts: BCM5301X: EA9200: add wifi definitions

[Florian Fainelli]

On 3/20/26 10:29, Florian Fainelli wrote:
> On 3/19/26 17:29, Rosen Penev wrote:
>> On Wed, Mar 18, 2026 at 8:53 PM Rosen Penev <rosenp at gmail.com> wrote:
>>>
>>> brcm,ccode-map and ieee80211-freq-limit are needed to be specified on
>>> some of them for proper operation.
>>>
>>> Signed-off-by: Rosen Penev <rosenp at gmail.com>
>>> ---
>>>   .../dts/broadcom/bcm4709-linksys-ea9200.dts   | 50 +++++++++++++++++++
>>>   1 file changed, 50 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/ 
>>> arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
>>> index 617fb55bc52f..7b1363aa1144 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
>>> @@ -93,6 +93,56 @@ led-3 {
>>>          };
>>>   };
>>>
>>> +&pcie_bridge0 {
>>> +       pcie at 0,0 {
>>> +               device_type = "pci';
>>> +               reg = <0x0000 0 0 0 0>;
>>> +               bus-range = <0x01 0xff>;
>>> +
>>> +               #address-cells = <3>;
>>> +               #size-cells = <2>;
>>> +               ranges;
>>> +
>>> +               pcie at 1,0 {
>>> +                       device_type = "pci';
>> There are typos here. "pci' vs "pci". Should I resend?
> 
> Not necessary, fixed it up while applying, thanks!

Meh, this was not even build tested, even fixing that gives me:

  ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make CHECK_DTBS=y 
broadcom/bcm4709-linksys-ea9200.dtb
   DTC [C] arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dtb
Lexical error: 
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts:107.19-22 
Unexpected 'pci'
Error: arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts:107.19-22 
syntax error
FATAL ERROR: Unable to parse input tree

Please resubmit patches 4 and 6 since I dropped them as a result.
-- 
Florian