[PATCH 4/6] ARM: dts: BCM5301X: EA9200: add wifi definitions

[Florian Fainelli]

On 3/19/26 17:29, Rosen Penev wrote:
> On Wed, Mar 18, 2026 at 8:53 PM Rosen Penev <rosenp at gmail.com> wrote:
>>
>> brcm,ccode-map and ieee80211-freq-limit are needed to be specified on
>> some of them for proper operation.
>>
>> Signed-off-by: Rosen Penev <rosenp at gmail.com>
>> ---
>>   .../dts/broadcom/bcm4709-linksys-ea9200.dts   | 50 +++++++++++++++++++
>>   1 file changed, 50 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
>> index 617fb55bc52f..7b1363aa1144 100644
>> --- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
>> +++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
>> @@ -93,6 +93,56 @@ led-3 {
>>          };
>>   };
>>
>> +&pcie_bridge0 {
>> +       pcie at 0,0 {
>> +               device_type = "pci';
>> +               reg = <0x0000 0 0 0 0>;
>> +               bus-range = <0x01 0xff>;
>> +
>> +               #address-cells = <3>;
>> +               #size-cells = <2>;
>> +               ranges;
>> +
>> +               pcie at 1,0 {
>> +                       device_type = "pci';
> There are typos here. "pci' vs "pci". Should I resend?

Not necessary, fixed it up while applying, thanks!
-- 
Florian