[PATCH v4 1/5] dt-bindings: soc: cix,sky1-system-control: add audss system control

[Joakim Zhang]

Hello,


> -----Original Message-----
> From: Conor Dooley <conor at kernel.org>
> Sent: Wednesday, June 17, 2026 11:54 PM
> To: Joakim Zhang <joakim.zhang at cixtech.com>
> Cc: mturquette at baylibre.com; sboyd at kernel.org; bmasney at redhat.com;
> robh at kernel.org; krzk+dt at kernel.org; conor+dt at kernel.org;
> p.zabel at pengutronix.de; Gary Yang <gary.yang at cixtech.com>; cix-kernel-
> upstream <cix-kernel-upstream at cixtech.com>; linux-clk at vger.kernel.org;
> devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org
> Subject: Re: [PATCH v4 1/5] dt-bindings: soc: cix,sky1-system-control: add audss
> system control
> 
> On Wed, Jun 17, 2026 at 02:04:33PM +0800, joakim.zhang at cixtech.com wrote:
> > From: Joakim Zhang <joakim.zhang at cixtech.com>
> >
> > The Cix Sky1 Audio Subsystem (AUDSS) groups audio-related clock, reset
> > and control registers in a dedicated CRU block. Software reset lines
> > are exposed on the syscon parent via #reset-cells, following the same
> > model as the existing Sky1 FCH and S5 system control bindings.
> >
> > A clock-controller child node is required under the audss syscon. It
> > has no reg property of its own and accesses the parent register block
> > for mux, divider and gate fields.
> >
> > The AUDSS is also controlled by one power domain and reset part.
> >
> > Signed-off-by: Joakim Zhang <joakim.zhang at cixtech.com>
> > ---
> >  .../soc/cix/cix,sky1-system-control.yaml      | 48 +++++++++++++++++++
> >  .../reset/cix,sky1-audss-system-control.h     | 25 ++++++++++
> >  2 files changed, 73 insertions(+)
> >  create mode 100644
> > include/dt-bindings/reset/cix,sky1-audss-system-control.h
> >
> > diff --git
> > a/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.ya
> > ml
> > b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.ya
> > ml index a01a515222c6..5a1cd5c24ade 100644
> > ---
> > a/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.ya
> > ml
> > +++ b/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-contro
> > +++ l.yaml
> > @@ -19,6 +19,7 @@ properties:
> >        - enum:
> >            - cix,sky1-system-control
> >            - cix,sky1-s5-system-control
> > +          - cix,sky1-audss-system-control
> >        - const: syscon
> 
> If the only thing these share are being a reset controller and having a syscon
> fallback, I think it should be in a different file.
> 

Thanks for the review. I'll split the AUDSS bindings into a separate YAML file.
One follow-up: should the AUDSS CRU driver be split out as well? I'm inclined to do that, so each binding maps to its own driver, but wanted to check whether you'd prefer a separate audss reset driver or keeping everything in reset-sky1 before I rework the series.

Hello @krzk+dt at kernel.org, what's your opinion?

Thanks,
Joakim