[PATCH 4/8] clk: clocking-wizard: Do not map the memory for static-config

[Shubhrajyoti Datta]

With xlnx,static-config the MMCM/PLL topology is fixed at synthesis time
and no register programming is performed; only the dynamic path needs
the AXI register block. Move devm_platform_ioremap_resource() under the
non-static-config branch.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta at amd.com>
---

 drivers/clk/xilinx/clk-xlnx-clock-wizard.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
index 4a0136349f71..e082051221be 100644
--- a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
@@ -1168,10 +1168,6 @@ static int clk_wzrd_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, clk_wzrd);
 
-	clk_wzrd->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(clk_wzrd->base))
-		return PTR_ERR(clk_wzrd->base);
-
 	clk_wzrd->axi_clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk");
 	if (IS_ERR(clk_wzrd->axi_clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->axi_clk),
@@ -1183,6 +1179,10 @@ static int clk_wzrd_probe(struct platform_device *pdev)
 	}
 
 	if (!of_property_present(np, "xlnx,static-config")) {
+		clk_wzrd->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(clk_wzrd->base))
+			return PTR_ERR(clk_wzrd->base);
+
 		ret = of_property_read_u32(np, "xlnx,speed-grade", &clk_wzrd->speed_grade);
 		if (!ret) {
 			if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) {
-- 
2.49.1