[PATCH 5/8] clk: clocking-wizard: Move clk_in1 acquisition before static-config check

[Shubhrajyoti Datta]

The clk_in1 is the input clock for both the dynamic reconfig and the
static-config paths. Acquire clk_in1 for static-config as well. Output
clocks are registered as fixed-factor children of clk_in1.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta at amd.com>
---

 drivers/clk/xilinx/clk-xlnx-clock-wizard.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
index e082051221be..ffc78c90bee6 100644
--- a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
@@ -1178,6 +1178,11 @@ static int clk_wzrd_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
+	if (IS_ERR(clk_wzrd->clk_in1))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->clk_in1),
+				     "failed to get clk_in1\n");
+
 	if (!of_property_present(np, "xlnx,static-config")) {
 		clk_wzrd->base = devm_platform_ioremap_resource(pdev, 0);
 		if (IS_ERR(clk_wzrd->base))
@@ -1192,11 +1197,6 @@ static int clk_wzrd_probe(struct platform_device *pdev)
 			}
 		}
 
-		clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
-		if (IS_ERR(clk_wzrd->clk_in1))
-			return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->clk_in1),
-					     "clk_in1 not found\n");
-
 		ret = clk_wzrd_register_output_clocks(&pdev->dev, nr_outputs);
 		if (ret)
 			return ret;
-- 
2.49.1