[PATCH 08/12] arm64: dts: rockchip: rk3588s-nanopi: remove always-on from vdd_npu_s0 reg

[Joachim Eastwood via B4 Relay]

From: Joachim Eastwood <joachim.eastwood at gmail.com>

Since the NPU is hooked up on these the always-on isn't needed anymore.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
index bcb2f5d63a61..463cfeddf270 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
@@ -258,7 +258,6 @@ vdd_npu_s0: regulator at 42 {
 		regulator-max-microvolt = <950000>;
 		regulator-ramp-delay = <2300>;
 		regulator-boot-on;
-		regulator-always-on;
 		vin-supply = <&vcc5v0_sys>;
 
 		regulator-state-mem {

-- 
2.55.0