[PATCH 07/12] arm64: dts: rockchip: rk3588s-nanopi: pcie2x1l2: add clkreq

[Joachim Eastwood via B4 Relay]

From: Joachim Eastwood <joachim.eastwood at gmail.com>

The clkreq is present on the board, so hook it up in DT.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
index 361682c18e69..bcb2f5d63a61 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
@@ -312,7 +312,8 @@ &pcie2x1l1 {
 
 &pcie2x1l2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie2_2_rst>;
+	pinctrl-0 = <&pcie2_2_rst>, <&pcie20x1m0_clkreqn>;
+	supports-clkreq;
 	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc_3v3_pcie20>;
 	status = "okay";

-- 
2.55.0