[PATCH 0/2] NPU and i2c3 + FUSB302 addition for Radxa Zero 2

[Neil Armstrong]

On 1/16/26 17:56, Krzysztof Kozlowski wrote:
> On 15/01/2026 09:06, Neil Armstrong wrote:
>> Hi,
>>
>> On Wed, 14 Jan 2026 23:48:35 +0100, Ricardo Pardini wrote:
>>> This series adds a few things missing from the Radxa Zero 2:
>>>
>>> 1) NPU (etnaviv), just enable the node, similar to what was done for VIM3
>>> 2) i2c3 (also exposed on the 40-pin header) and the FUSB302 at 0x22
>>>
>>>
>>
>> Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.20/arm64-dt)
>>
>> [1/2] arm64: dts: amlogic: Enable the npu node on Radxa Zero 2
>>        https://git.kernel.org/amlogic/c/29deec49146162d06b17739c627d062191e03814
>> [2/2] arm64: dts: amlogic: add the type-c controller on Radxa Zero 2
>>        https://git.kernel.org/amlogic/c/8f5aa8d444d1d200715c36a8f072054a49bfb410
> 
> 
> You went quite fast, but this has warnings. See also Rob's bot response.

I dropped the patch almost immediately

> 
> Best regards,
> Krzysztof