[PATCH 0/2] NPU and i2c3 + FUSB302 addition for Radxa Zero 2

[Krzysztof Kozlowski]

On 15/01/2026 09:06, Neil Armstrong wrote:
> Hi,
> 
> On Wed, 14 Jan 2026 23:48:35 +0100, Ricardo Pardini wrote:
>> This series adds a few things missing from the Radxa Zero 2:
>>
>> 1) NPU (etnaviv), just enable the node, similar to what was done for VIM3
>> 2) i2c3 (also exposed on the 40-pin header) and the FUSB302 at 0x22
>>
>>
> 
> Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.20/arm64-dt)
> 
> [1/2] arm64: dts: amlogic: Enable the npu node on Radxa Zero 2
>       https://git.kernel.org/amlogic/c/29deec49146162d06b17739c627d062191e03814
> [2/2] arm64: dts: amlogic: add the type-c controller on Radxa Zero 2
>       https://git.kernel.org/amlogic/c/8f5aa8d444d1d200715c36a8f072054a49bfb410


You went quite fast, but this has warnings. See also Rob's bot response.

Best regards,
Krzysztof