[PATCH v2] arm64: dts: broadcom: bcm2712: Add V3D device node

[Maíra Canal]

Hi Peter,

On 16/01/26 00:53, Peter Robinson wrote:
> Hi Maira,
> 
> On 14/01/2026 12:04, Maíra Canal wrote:
>> Commits 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x")
>> and 6fd9487147c4 ("drm/v3d: add brcm,2712-v3d as a compatible V3D 
>> device")
>> added driver support for V3D on BCM2712, but the corresponding device
>> tree node is still missing.
>>
>> Add the V3D device tree node to the BCM2712 DTS.
>>
>> Signed-off-by: Maíra Canal <mcanal at igalia.com>
>>
>> ---
>> v1 -> v2:
>>
>> - Rebased on top of linux-next (Stefan Wahren)
>> - Fixed node's address (2000000 -> 1002000000) (Stefan Wahren)
>> - Link to v1: https://lore.kernel.org/linux- 
>> devicetree/20260113192902.48046-2-mcanal at igalia.com/
>> ---
>>   .../boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi    |  4 ++++
>>   arch/arm64/boot/dts/broadcom/bcm2712.dtsi          | 14 ++++++++++++++
>>   2 files changed, 18 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi b/ 
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi
>> index 7d4742ebe247..97522c6803c5 100644
>> --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi
>> +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi
>> @@ -247,3 +247,7 @@ &pcie1 {
>>   &pcie2 {
>>       status = "okay";
>>   };
>> +
>> +&v3d {
>> +    clocks = <&firmware_clocks 5>;
> 
> Looking at the upstream DT [1] I think this also needs a clock-names entry.

Differently from the `hvs` node [1] you sent (which specifies clock-
names), the `v3d` binding [2] doesn't have a clock-names property.
Therefore, it is not needed.

[1] 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
[2] 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml

Best regards,
- Maíra

> 
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ 
> tree/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi#n233
> 
>> +};
>> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/ 
>> boot/dts/broadcom/bcm2712.dtsi
>> index 330a121ebfcb..661668ef7419 100644
>> --- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
>> +++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
>> @@ -1,5 +1,6 @@
>>   // SPDX-License-Identifier: (GPL-2.0 OR MIT)
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/soc/bcm2835-pm.h>
>>   / {
>>       compatible = "brcm,bcm2712";
>> @@ -642,6 +643,19 @@ mip1: msi-controller at 1000131000 {
>>               msi-ranges = <&gicv2 GIC_SPI 247 IRQ_TYPE_EDGE_RISING 8>;
>>               brcm,msi-offset = <8>;
>>           };
>> +
>> +        v3d: gpu at 1002000000 {
>> +            compatible = "brcm,2712-v3d";
>> +            reg = <0x10 0x02000000 0x00 0x4000>,
>> +                  <0x10 0x02008000 0x00 0x6000>,
>> +                  <0x10 0x02030800 0x00 0x0700>;
>> +            reg-names = "hub", "core0", "sms";
>> +
>> +            power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
>> +            resets = <&pm BCM2835_RESET_V3D>;
>> +            interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>> +                     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
>> +        };
>>       };
>>       vc4: gpu {