[PATCH v2] arm64: dts: broadcom: bcm2712: Add V3D device node

[Peter Robinson]

Hi Maira,

On 14/01/2026 12:04, Maíra Canal wrote:
> Commits 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x")
> and 6fd9487147c4 ("drm/v3d: add brcm,2712-v3d as a compatible V3D device")
> added driver support for V3D on BCM2712, but the corresponding device
> tree node is still missing.
>
> Add the V3D device tree node to the BCM2712 DTS.
>
> Signed-off-by: Maíra Canal <mcanal at igalia.com>
>
> ---
> v1 -> v2:
>
> - Rebased on top of linux-next (Stefan Wahren)
> - Fixed node's address (2000000 -> 1002000000) (Stefan Wahren)
> - Link to v1: https://lore.kernel.org/linux-devicetree/20260113192902.48046-2-mcanal@igalia.com/
> ---
>   .../boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi    |  4 ++++
>   arch/arm64/boot/dts/broadcom/bcm2712.dtsi          | 14 ++++++++++++++
>   2 files changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi
> index 7d4742ebe247..97522c6803c5 100644
> --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi
> +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi
> @@ -247,3 +247,7 @@ &pcie1 {
>   &pcie2 {
>   	status = "okay";
>   };
> +
> +&v3d {
> +	clocks = <&firmware_clocks 5>;

Looking at the upstream DT [1] I think this also needs a clock-names entry.

[1] 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi#n233

> +};
> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
> index 330a121ebfcb..661668ef7419 100644
> --- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
> +++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
> @@ -1,5 +1,6 @@
>   // SPDX-License-Identifier: (GPL-2.0 OR MIT)
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/bcm2835-pm.h>
>   
>   / {
>   	compatible = "brcm,bcm2712";
> @@ -642,6 +643,19 @@ mip1: msi-controller at 1000131000 {
>   			msi-ranges = <&gicv2 GIC_SPI 247 IRQ_TYPE_EDGE_RISING 8>;
>   			brcm,msi-offset = <8>;
>   		};
> +
> +		v3d: gpu at 1002000000 {
> +			compatible = "brcm,2712-v3d";
> +			reg = <0x10 0x02000000 0x00 0x4000>,
> +			      <0x10 0x02008000 0x00 0x6000>,
> +			      <0x10 0x02030800 0x00 0x0700>;
> +			reg-names = "hub", "core0", "sms";
> +
> +			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> +			resets = <&pm BCM2835_RESET_V3D>;
> +			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>   	};
>   
>   	vc4: gpu {