[PATCH v3 5/5] arm64: dts: qcom: talos-evk-camera: Add DT overlay
Wenmeng Liu
wenmeng.liu at oss.qualcomm.com
Thu Jan 15 02:12:41 PST 2026
Enable IMX577 via CCI on Taloss EVK Core Kit.
The Talos EVK board does not include a camera sensor
by default, this DTSO has enabled the Arducam 12.3MP
IMX577 Mini Camera Module on the CSI-1 interface.
Signed-off-by: Wenmeng Liu <wenmeng.liu at oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/Makefile | 3 ++
.../boot/dts/qcom/talos-evk-camera-imx577.dtso | 63 ++++++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 00652614e73582fa9bd5fbeff4836b9496721d2d..be9aeff2cd1555bc436e1b8eb78d8e1c9b84f9c4 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -339,8 +339,11 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += talos-evk.dtb
+dtbo-$(CONFIG_ARCH_QCOM) += talos-evk-camera-imx577.dtbo
+talos-evk-camera-imx577-dtbs := talos-evk.dtb talos-evk-camera-imx577.dtbo
talos-evk-lvds-auo,g133han01-dtbs := \
talos-evk.dtb talos-evk-lvds-auo,g133han01.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += talos-evk-camera-imx577.dtb
dtb-$(CONFIG_ARCH_QCOM) += talos-evk-lvds-auo,g133han01.dtb
x1e001de-devkit-el2-dtbs := x1e001de-devkit.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/talos-evk-camera-imx577.dtso b/arch/arm64/boot/dts/qcom/talos-evk-camera-imx577.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..53006a861878f9112673b9a0ad954bed7a5fdca5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos-evk-camera-imx577.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,qcs615-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&camss {
+ vdd-csiphy-1p2-supply = <&vreg_l11a>;
+ vdd-csiphy-1p8-supply = <&vreg_l12a>;
+
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 1 {
+ reg = <1>;
+
+ csiphy1_ep: endpoint {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&imx577_ep1>;
+ };
+ };
+ };
+};
+
+&cci {
+ status = "okay";
+};
+
+&cci_i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera at 1a {
+ compatible = "sony,imx577";
+ reg = <0x1a>;
+
+ reset-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&cam2_default>;
+ pinctrl-names = "default";
+
+ clocks = <&camcc CAM_CC_MCLK2_CLK>;
+ assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+ assigned-clock-rates = <24000000>;
+
+ avdd-supply = <&vreg_s4a>;
+
+ port {
+ imx577_ep1: endpoint {
+ link-frequencies = /bits/ 64 <600000000>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csiphy1_ep>;
+ };
+ };
+ };
+};
--
2.34.1
More information about the linux-arm-kernel
mailing list