[PATCH v3 4/5] arm64: dts: qcom: talos: Add camera MCLK pinctrl

[Wenmeng Liu]

Define pinctrl definitions to enable camera master clocks on Talos.

Signed-off-by: Wenmeng Liu <wenmeng.liu at oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy at linaro.org>
---
 arch/arm64/boot/dts/qcom/talos.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index 162bbe353b62342478885f22972a816f1b60d820..f77c7faa97561a0a95974de1a39cc4ba0e43f663 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -1554,6 +1554,34 @@ tlmm: pinctrl at 3100000 {
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
+			cam0_default: cam0-default-state {
+				pins = "gpio28";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam1_default: cam1-default-state {
+				pins = "gpio29";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam2_default: cam2-default-state {
+				pins = "gpio30";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam3_default: cam3-default-state {
+				pins = "gpio31";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cci_i2c0_default: cci-i2c0-default-state {
 				/* SDA, SCL */
 				pins = "gpio32", "gpio33";

-- 
2.34.1