[PATCH 0/6] arm64: dts: amlogic: assign the MMC signal clocks

[Neil Armstrong]

On 1/14/26 18:08, Jerome Brunet wrote:
> The amlogic MMC driver operate with the assumption that MMC clock
> is configured to provide 24MHz. It uses this path for low
> rates such as 400kHz.
> 
> Assign the clocks to make sure they are properly configured
> 
> This fix has been split into multiple changes to get the Fixes tag
> right and help stable pick up the change.
> 
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> ---
> Jerome Brunet (6):
>        arm64: dts: amlogic: c3: assign the MMC signal clocks
>        arm64: dts: amlogic: a1: align the mmc clock setup
>        arm64: dts: amlogic: axg: assign the MMC signal clocks
>        arm64: dts: amlogic: gx: assign the MMC signal clocks
>        arm64: dts: amlogic: g12: assign the MMC B and C signal clocks
>        arm64: dts: amlogic: g12: assign the MMC A signal clock
> 
>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi       | 7 +++++++
>   arch/arm64/boot/dts/amlogic/meson-a1.dtsi         | 5 +++--
>   arch/arm64/boot/dts/amlogic/meson-axg.dtsi        | 6 ++++++
>   arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 9 +++++++++
>   arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi       | 9 +++++++++
>   arch/arm64/boot/dts/amlogic/meson-gxl.dtsi        | 9 +++++++++
>   6 files changed, 43 insertions(+), 2 deletions(-)
> ---
> base-commit: cd3b654a413c14648d0074ca160da62e4e29ac88
> change-id: 20260114-amlogic-mmc-clocks-followup-a0733cc59283
> 
> Best regards,

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>

Thanks,
Neil